Home | Sub Study Area | Engineering

Engineering

Civil Construction Design pre-requisite Skill Set

State ID: GAA95

2019 Dates

Wednesday July 24 - Wednesday September 25, 2019

Delivery location, important dates and study options

Semester 2

Munster Campus - Part Time-Classroom

Overview

Units

Overview
Where Munster Campus
How Part Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

Machines and Motors Skill Set

State ID: GAA32

This course is designed to develop the students theoretical and practical skills in the analysis, operation and application of industrial electrical systems in the areas of AC power systems , rotating machines,calculation of circuit network parameters , maintenance in Ore handling operations, motor selection, maintenance techniques and motor protection.

Prerequisite Units:
There are prerequisite requirements which are covered as recognition of prior learning (RPL) based on previous qualification and work experience.

Delivery location, important dates and study options

Semester 2

Munster Campus - October 2019

Overview

Units

Overview
Where Munster Campus
How Part Time
Fee
Non-concession:
$1,908.30
Enquire now
Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

Engineering Energy Sector Skill Set

State ID: GAA31

The Applied Electrical Engineering Solutions in Energy Sector skill set is part of the Advanced Diploma Engineering Technology-Electrical. Student will gain the calculation techniques start from a solid foundation to advanced mathematical processes such as Algebra, Statistics, and MATLAB Software to apply solutions to solve the practical problem in the electrical engineering tasks. And further developing strategies to address environment and sustainability issues in the energy sector and understanding an organisation's occupational health and safety policies and procedures.

Job opportunities

Job opportunities

After completing all of the Electrical Skill Sets: Electrical Engineer Technologist, Technician, Design and Draftsperson.

Delivery location, important dates and study options

Semester 2

Munster Campus - October 2019

Overview

Units

Overview
Where Munster Campus
How Part Time
Fee
Non-concession:
$1,695.08
Enquire now
Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

Drafting and Estimates Skill Set

State ID: GAA35

Build your career in electrical design and contracting by understanding on how to create project specific requirements, drawings, schematics, schedules, estimates, and common tendering document procedures used in Australian electrical work and services.

This is a Blackboard Learning Management System based course (online). Access to AutoCAD and AutoCAD Electrical and Estimation software is mandatory.

There are prerequisite requirements which are covered as Recognition of Prior Learning (RPL) based on previous qualification and work experience.

Pre-requisite units:

Delivery location, important dates and study options

Semester 2

Munster Campus - October 2019

Overview

Units

Overview
Where Munster Campus
How Part Time
Fee
Non-concession:
$1,144.20
Enquire now
Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

Civil Structural Design, Model and Drafting Skill Set

State ID: GAA34

Take your career in Building Information Modeling (BIM) to the next level with analytical and practical design skills based around construction industry standards and software tools with a course from South Metropolitan TAFE.

Discover how to use tools like Revit BIM and Robot Structure analysis to construct and analyse CAD models to Australian design standards. Use your designs to develop detailed plans for workflow management and collaboration across disciplines.

Upon completion of the course a student will be able to demonstrate they have learned:

Study pathway

Study pathway

Further study opportunities:

This short course is 1 of 3 evening skillsets offered. Completion of all 3 skillsets will achieve Diploma of Civil Construction Design qualification.

Delivery location, important dates and study options

Semester 2

Munster Campus - October 2019

Overview

Units

Overview
Where Munster Campus
How Part Time
Fee
Non-concession:
$1,859.89
Enquire now
Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

Maintenance Planning, Scheduling and Coordination Skill Set

State ID: GAA28

The Maintenance Planning, Scheduling and Coordination skill set is part of the Diploma of Engineering and is designed to develop your skills in leadership, innovation and continuous improvement, planning and estimating, quality assurance/compliance, systems and IT.

You can choose to focus on either the electrical or mechanical stream of this skill set.

Job opportunities

Job opportunities

On completion of this course you will receive a Statement of Attainment and may be able to work as a Maintenance Coordinator or if you have the relevant experience, a Maintenance Supervisor, Planner or Manager.

Delivery location, important dates and study options

Semester 2

Munster Campus - October 2019

Overview

Units

Overview
Duration 20 weeks
Where Munster Campus
How Part Time
Fee
Non-concession:
$2,260.18
Enquire now
Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

Advanced Diploma of Civil Construction Design

National ID: RII60515 | State ID: AZA8

The Advanced Diploma of Civil Construction Design reflects the role of senior civil works designers or para-professional designers who support professional engineers.  They perform tasks that are broad, specialised, complex and technical and include strategic areas and initiating activities.  They are responsible for the design of complex projects to ensure the implementation of the client site requirements and are required to demonstrate self-directed application of theoretical and technical knowledge and initiate solutions to technical problems or management requirements.

Job opportunities

Job opportunities

 

Senior civil works designers or para-professional designers who support professional engineers.

 

 

For information about jobs and pathways, please see http://joboutlook.gov.au/

 

Further study opportunities:

 

  • University

 

Delivery location, important dates and study options

Semester 1

Munster Campus - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 1
Where Munster Campus
How Full Time
Apply now
This course uses TAFE Admissions. Apply by 6 December to study in Semester 1. 
Munster Campus - Part Time-Self Paced

Overview

Fees and charges

Units

Overview
Duration 6 months
When Semester 1
Where Munster Campus
How Part Time
Self Paced
Get started
This course is available to start anytime for online study. 

Semester 2

Munster Campus - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 2
Where Munster Campus
How Full Time
Apply now
This course uses TAFE Admissions. Apply by 6 December to study in Semester 1. 

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

Advanced Diploma of Engineering

National ID: MEM60112 | State ID: J368

Are you ready for a technically advanced engineering career?

When you complete the Advanced Diploma of Engineering you'll have analytical skills in mechanical engineering, as an engineering technician, detailed drafter, or maintenance technician.

Find out why engineering design and automation are 'jobs of the future'

Entrance Requirements

Job opportunities

Entrance Requirements

   
This course is available as a traineeship.

Entrance requirements for traineeships

You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship. 

In a traineeship you also gain hands-on skills and work experience, and improve your employment prospects, while earning a wage. On successful completion you will gain a nationally recognised qualification which can lead to rewarding career options. The difference between a traineeship and an apprenticeship is that a traineeship can be either a full time or part time employment based training arrangement, usually for a nominal duration of 12 months or more, generally in a non-trade related area. 

To find out how to arrange a traineeship and study at South Metropolitan TAFE, please contact the Jobs and Skills Centre closest to you.

Job opportunities

The Advanced Diploma of Engineering provides the formal technical education, which is necessary for engineering associates and engineering technicians. Among the skills you will develop are: - able to carry out mechanical engineering and design drafting; - engage in work which is basically analytical with a good background understanding of manufacturing and fabrication techniques; - develop a broad understanding of the applications of engineering principles, materials, systems, standards and processes. A significant feature of the qualification is its practical learning-by-doing project component. Graduates are typically employed in areas such as: - computer aided design and drafting - process plant drafting and design - machine drafting and design - air conditioning drafting and design - shipbuilding drafting and design - plant maintenance supervision (building on a trade background) - general engineering and technical positions - other technical areas

 

For information about jobs and pathways, please see http://joboutlook.gov.au/

 

Further study opportunities:

 

  • University

 

Delivery location, important dates and study options

All year round

Munster Campus - Classroom-Traineeship

Overview

Fees and charges

Units

Overview
Duration 24 months
When All year round
Where Munster Campus
How Part Time
Workplace
Apply now
Let us help you make the approach to an employer to become their apprentice or trainee.
Munster Campus - Part Time-Self Paced

Overview

Fees and charges

Units

Overview
Duration 24 months
When All year round
Where Munster Campus
How Part Time
Self Paced
Get started
This course is available to start anytime for online study. 
Munster Campus - Self Paced-Traineeship

Overview

Fees and charges

Units

Overview
Duration 24 months
When All year round
Where Munster Campus
How Part Time
Workplace
Apply now
Let us help you make the approach to an employer to become their apprentice or trainee.

Semester 1

Munster Campus - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 2 years
When Semester 1
Where Munster Campus
How Full Time
Apply now
This course uses TAFE Admissions. Apply by 6 December to study in Semester 1. 

Semester 2

Munster Campus - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 2 years
When Semester 2
Where Munster Campus
How Full Time
Apply now
This course uses TAFE Admissions. Apply by 6 December to study in Semester 1. 

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

Advanced Diploma of Engineering Technology - Electrical

National ID: UEE62111 | State ID: A175

This course leads to a job of the future with STEM skills highly prized in the implementation of smart homes (Internet of Things), automated industrial production line mechatronics, administering or upgrading infrastructure for small to large scale businesses among many other innovative applications.

Find out why engineering design and automation are 'jobs of the future'

Job opportunities

Study pathway

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Study pathway

Part time study is available by enrolling in the three skill sets listed above, which make up the Diploma qualification and provide credit for this Advanced qualification.

Become a specialist in your field with university study

This course has a university study pathway as at 14 August 2019.

Curtin University – Bachelor of Engineering (Honours) – 150-200 credits

Curtin University – Bachelor of Science (Multidisciplinary Science) – 150 credits

Edith Cowan University – Bachelor of Engineering (Electrical and Renewable Energy) (W21) – Up to 120 credits

Edith Cowan University – Bachelor of Engineering (Electrical Power) (Y49) – Up to 120 credits

Edith Cowan University – Bachelor of Engineering (Electronics and Communications) (Y51) – Up to 120 credits

Edith Cowan University – Bachelor of Engineering (Instrumentation Control & Automation) (Y46) – Up to 120 credits

Murdoch University – Bachelor of Engineering (Honours) in Industrial Computer Systems Engineering (H1264) – 6 credits

Murdoch University – Bachelor of Engineering (Honours) in Instrumentation and Control Engineering (H1264) – 6 credits

Murdoch University – Bachelor of Engineering (Honours) in Renewable Energy Engineering (H1264) – 6 credits

The information about university credit points and tuition costs provides a general guide only. To check the current credit arrangements and to find more information about how credits work at the listed university of your choice, visit TAFE International WA’s University Pathway Finder.

Delivery location, important dates and study options

All year round

Munster Campus - Part Time-Self Paced

Overview

Fees and charges

Units

Overview
Duration 24 months
When All year round
Where Munster Campus
How Part Time
Self Paced
Get started
This course is available to start anytime for online study. 
Munster Campus - Part Time-Self Paced

Overview

Fees and charges

Units

Overview
Duration 24 months
When All year round
Where Munster Campus
How Part Time
Self Paced
Get started
This course is available to start anytime for online study. 
Munster Campus - Part Time-Self Paced

Overview

Fees and charges

Units

Overview
Duration 24 months
When All year round
Where Munster Campus
How Part Time
Get started
This course is available to start anytime for online study. 

Semester 1

Munster Campus - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 2 years
When Semester 1
Where Munster Campus
How Full Time
Apply now
This course uses TAFE Admissions. Apply by 6 December to study in Semester 1. 

Semester 2

Munster Campus - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 2 years
When Semester 2
Where Munster Campus
How Full Time
Apply now
This course uses TAFE Admissions. Apply by 6 December to study in Semester 1. 

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

Applied Engineering Drawing and CAD Skill Set

State ID: GAA29

You will gain experience in producing industry standard 2D and 3D Engineering Drawings and gain a working knowledge of appropriate standards whilst learning Autodesk’s AutoCAD drafting system. Learn how to produce fully parametric 3D models and assemblies using Autodesk’s Inventor software

Delivery location, important dates and study options

Semester 2

Munster Campus - October 2019

Overview

Units

Overview
Where Munster Campus
How Part Time
Fee
Non-concession:
$1,764.72
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

Pages