COVID-19 updates
Home | Sub Study Area | Engineering

Engineering

Diploma of Computer Systems Engineering

National ID: UEE50111 | State ID: A155

Are you ready for a high end technology career?

When you complete the Diploma of Computer Systems Engineering you'll be well on your way to a career as an engineering associate, technical officer, or computer systems technician.

Job opportunities

Job opportunities

 

  • When you complete the Diploma of Computer Systems Engineering you'll be well on your way to a career as an engineering associate, technical officer, or computer systems technician.

 

 

For information about jobs and pathways, please see http://joboutlook.gov.au/

 

Further study opportunities:

 

  • University

 

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

Semester 1

Thornlie - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 3 semesters
When Semester 1
Where Thornlie
How Full Time
Apply now
This course uses TAFE Admissions. Applications are now open for Semester 2. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Certificate IV in Electronics and Communications

National ID: UEE40711 | State ID: A137

Are you ready for an electronics career helping others get the message?

When you complete the Certificate IV in Electronics and Communications you'll be well on your way to a career as an electronic technician.

Job opportunities

Job opportunities

 

  • When you complete the Certificate IV in Electronics and Communications you'll be well on your way to a career as an electronic technician.

 

 

For information about jobs and pathways, please see http://joboutlook.gov.au/

 

Further study opportunities:

 

  • UEE50111 Diploma of Computer Systems Engineering , State ID A155
  • UEE50511 Diploma of Electronics and Communications Engineering, State ID A160

 

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

All year round

Thornlie - Classroom-Traineeship

Overview

Fees and charges

Units

Overview
Duration 2 years
When All year round
Where Thornlie
How Part Time
Traineeship
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 1

Thornlie - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 year
When Semester 1
Where Thornlie
How Full Time
Apply now
This course uses TAFE Admissions. Applications are now open for Semester 2. 

Semester 2

Thornlie - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 year
When Semester 2
Where Thornlie
How Full Time
Apply now
This course uses TAFE Admissions. Applications are now open for Semester 2. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Certificate IV in Computer Systems

National ID: UEE40111 | State ID: A132

Are you ready for a technology career hardwired for success?

When you complete the Certificate IV in Computer Systems you'll be well on your way to an exciting IT career. Gain skills that employers will value for a computer systems technician.

Job opportunities

Study pathway

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

Semester 1

Thornlie - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 year
When Semester 1
Where Thornlie
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2

Thornlie - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 year
When Semester 2
Where Thornlie
How Full Time
Apply now
This course uses TAFE Admissions. Applications are now open for Semester 2. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Maintenance Planning, Scheduling and Coordination Skill Set

State ID: GAA28

The Maintenance Planning, Scheduling and Coordination skill set is part of the MEM50212 Diploma of Engineering - Technical,  nationally recognised qualification. It is designed to develop your skills in leadership, innovation and continuous improvement, planning and estimating, quality assurance/compliance, systems and IT.

You can choose to focus on either the electrical or mechanical stream of this skill set.

Job opportunities

Job opportunities

On completion of this course you will receive a Statement of Attainment and may be able to work as a Maintenance Coordinator or if you have the relevant experience, a Maintenance Supervisor, Planner or Manager.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

All year round

Munster - Part Time-Self Paced Onsite

Overview

Units

Overview
Duration 20 weeks
Where Munster
How Part Time
Fee
Non concession:
$2,267.18
Get started
This course is available to start anytime for online study. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Civil Structural Design, Model and Drafting Skill Set

State ID: GAA34

This skill set is part of the RII50515 Diploma of Civil Construction Design, a nationally recognised qualification. Take your career in Building Information Modeling (BIM) to the next level with analytical and practical design skills based around construction industry standards and software tools.

Discover how to use tools like Revit BIM and Robot Structure analysis to construct and analyse CAD models to Australian design standards. Use your designs to develop detailed plans for workflow management and collaboration across disciplines.

Study pathway

Study pathway

Further study opportunities:

This short course is 1 of 3 evening skillsets offered. Completion of all 3 skillsets will achieve Diploma of Civil Construction Design qualification.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

This course is available for study starting term 1 and term 3 in 2020 with a mix of online study and attendance at Munster campus for workshops. 

This skill set is part of  RII50515 Diploma of Civil Construction Design

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Machines and Motors Skill Set

State ID: GAA32

This skill set is part of UEE62111 Advanced Diploma of Engineering Technology - Electrical, a nationally recognised qualification and is designed to develop the students theoretical and practical skills in the analysis, operation and application of industrial electrical systems in the areas of AC power systems , rotating machines,calculation of circuit network parameters , maintenance in Ore handling operations, motor selection, maintenance techniques and motor protection.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

This course is available for study starting term 1 and term 3 in 2020 with a mix of online study and attendance at Munster campus for workshops. 

This skill set is part of the UEE62111 Advanced Diploma of Engineering Technology - Electrical.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Engineers Australia Skill Set

State ID: GAA80

This skillset is comprised of 5 units which in combination with the Advanced Diploma of Process Technology delivered at ACEPT, have been formally endorsed by Engineers Australia allowing membership to Engineers Australia and 1 year of advanced standing at both Edith Cowan and Curtain Universities for the process/Chemical Engineering Degree.

Upcoming dates:

No classes scheduled at this time

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

Semester 2

Munster - Full Time-Classroom

Overview

Units

Overview
Where Munster
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Munster - Full Time-Classroom

Overview

Units

Overview
Where Munster
How Full Time
Enquire now
Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Engineering Energy Sector Skill Set

State ID: GAA31

The Applied Electrical Engineering Solutions in Energy Sector skill set is part of the Advanced Diploma Engineering Technology-Electrical. Student will gain the calculation techniques start from a solid foundation to advanced mathematical processes such as Algebra, Statistics, and MATLAB Software to apply solutions to solve the practical problem in the electrical engineering tasks. And further developing strategies to address environment and sustainability issues in the energy sector and understanding an organisation's occupational health and safety policies and procedures.

Job opportunities

Job opportunities

After completing all of the Electrical Skill Sets: Electrical Engineer Technologist, Technician, Design and Draftsperson.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

This course is available for study starting term 1 and term 3 in 2020 with a mix of online study and attendance at Munster campus for workshops. 

This skill set is part of the UEE62111 Advanced Diploma of Engineering Technology - Electrical.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Certificate III in Engineering - Fabrication Trade (Heavy/Welding YH)

National ID: MEM30305 | State ID: WT77

Are you looking for a career making and fixing all things mechanical?

When you complete the Certificate III in Engineering - Fabrication Trade (Heavy/Welding YH) you'll be looking at a trades career as a boilermaker, welder, or fabricator in industries such as mining or construction. Develop practical knowledge and gain hands-on skills in fabrication and welding, using industry standard technologies and techniques. 

Entrance Requirements

Job opportunities

Study pathway

Entrance Requirements

 

This course is available as an apprenticeship.

Entrance requirements for apprenticeships

You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship. 

An apprenticeship involves full time work with an employer who provides an opportunity to learn all aspects of a trade. This is a structured program for a fixed period of time and while you learn on the job, you also attend off the job training at SM TAFE.

Some of the benefits of an Apprenticeship are that you can:

  • Earn a wage while you train
  • Learn on the job skills combined with off the job training
  • Receive a nationally recognised qualification on successful completion
  • Start a valuable step towards a rewarding career path

 

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

All year round

Naval Base - Classroom-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 36 months
When All year round
Where Naval Base
How Part Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Thornlie - Classroom-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 36 months
When All year round
Where Thornlie
How Part Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Diploma of Engineering - Technical

National ID: MEM50212 | State ID: J367

Are you ready for a technically advanced engineering career?

Advance your career with a technical engineering qualification. The Diploma of Engineering - Technical covers a diverse range of theoretical and technical skills for pursuing a career in the mechanical, mechatronic, manufacturing and maintenance engineering fields. This course emphasises the transfer of theoretical concepts to practical real-life applications to ensure our students graduate with job-ready skills. 

Find out why automation is a 'job of the future'

Job opportunities

Study pathway

Job opportunities

Mechanical Engineering is the most broadly based branch of engineering. Mechanical Engineers oversee all aspects of the design, development, installation, operation and maintenance of machinery. Examples of areas in which Mechanical Engineers work are Mining and Resource industries, Power generation, Manufacturing, Transportation, Refrigeration and Air conditioning , Technical sales and Consulting, Ship design and construction, and Aviation and Aerospace. 

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Study pathway

Become a specialist in your field with university study

This course has a university study pathway as at 28 October 2019.

Edith Cowan University – Bachelor of Engineering (Mechanical) (Y45) – Up to 120 credits 

The information about university credit points and tuition costs provides a general guide only. To check the current credit arrangements and to find more information about how credits work at the listed university of your choice, visit TAFE International WA’s University Pathway Finder.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

All year round

Munster - Classroom-Traineeship

Overview

Fees and charges

Units

Overview
Duration 12 months
When All year round
Where Munster
How Part Time
Apply now
Let us help you make the approach to an employer to become their apprentice or trainee.

Semester 1

Munster - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 year
When Semester 1
Where Munster
How Full Time
Apply now
This course uses TAFE Admissions. Applications are now open for Semester 2. 
Munster - Part Time-Self Paced

Overview

Fees and charges

Units

Overview
Duration 12 months
When Semester 1
Where Munster
How Part Time
Get started
This course is available to start anytime for online study. 

Semester 2

Munster - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 year
When Semester 2
Where Munster
How Full Time
Apply now
This course uses TAFE Admissions. Applications are now open for Semester 2. 
Munster - Part Time-Self Paced

Overview

Fees and charges

Units

Overview
Duration 12 months
When Semester 2
Where Munster
How Part Time
Apply now
This course uses TAFE Admissions. Applications are now open for Semester 2. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Pages