Home | Sub Study Area | Electrical and Electrotechnology

Electrical and Electrotechnology

Certificate IV in Computer Systems

National ID: UEE40111 | State ID: A132

Are you ready for a technology career hardwired for success?

When you complete the Certificate IV in Computer Systems you'll be well on your way to an exciting IT career. Gain skills that employers will value for a computer systems technician.

Job opportunities

Study pathway

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Delivery location, important dates and study options

Semester 1

Thornlie - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 year
When Semester 1
Where Thornlie
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2

Thornlie - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 year
When Semester 2
Where Thornlie
How Full Time
Apply now
This course uses TAFE Admissions. Express your interest in remaining places in Semester 1. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

General Legislative Requirements

State ID: S0059P

Full Electrical Contractors Course

To be eligible you must hold a current electrical workers licence, restricted licence is not acceptable.

The full electrical contractors course includes both nominee and business components.

  • Nominee component includes five days face to face
  • Business component includes online learning plus one day of assessment maximum six months to complete

Business and Nominee contractors courses can be completed separately.

Delivery location, important dates and study options

All year round

Thornlie - Part Time-External-Commercial-Short Course

Overview

Units

Overview
Where Thornlie
How Part Time
Self Paced
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Certificate IV in Engineering (Instrumentation)

National ID: MEM40105 | State ID: WT46

Are you working in the engineering industry and looking to advance your career further? The Certificate IV in Engineering (Instrumentation) has been specifically designed for any qualified tradesperson such as unrestricted electricians, electrical fitters, engineers in the resource industry, refrigeration technicians, or for apprentices in their third or fourth year of study. Learn to install, commission, calibrate and maintain modern instrumentation and control systems, as well as loop turning of multi controller or multi element systems.

Job opportunities

Study pathway

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Delivery location, important dates and study options

All year round

Munster - Part Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 24 months
When All year round
Where Munster
How Part Time
Register now
Register to study part time for this course in Semester 1. Call us on 1800 001 001 to express your interest in remaning places.
Munster - Part Time-Self Paced External-Commercial

Overview

Fees and charges

Units

Overview
Duration 24 months
When All year round
Where Munster
How Part Time
Self Paced
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

All year round

Munster - Part Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 24 months
When All year round
Where Munster
How Part Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Munster - Part Time-Self Paced

Overview

Fees and charges

Units

Overview
Duration 24 months
When All year round
Where Munster
How Part Time
Self Paced
Get started
This course is available to start anytime for online study. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Certificate II in Electronics

National ID: UEE21911 | State ID: A113

Looking for an electrifying career path?

Flick on the switch to a new career in electronics! Get your foot in the door with the Certificate II in Electronics and discover an introduction to the world of electronics to gain knowledgeable and practical workshop skills. 

Job opportunities

Study pathway

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Delivery location, important dates and study options

All year round

Munster - Classroom-Traineeship

Overview

Fees and charges

Units

Overview
Duration 6 months
When All year round
Where Munster
How Part Time
Traineeship
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 1

Rockingham - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 1
Where Rockingham
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Thornlie - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 1
Where Thornlie
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2

Rockingham - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 2
Where Rockingham
How Full Time
Apply now
This course uses TAFE Admissions. Express your interest in remaining places in Semester 1. 
Thornlie - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 2
Where Thornlie
How Full Time
Apply now
This course uses TAFE Admissions. Express your interest in remaining places in Semester 1. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Data Communications - Install and Modify Performance Data Communication Structured Cabling

National ID: UEESS00052 | State ID: AB672

To enrol into this course you must already have an Open Cabling registration.
UEENEEF105A - Install and modify optical fibre performance data communication cabling.

On completion of this unit of competency the student will be able to register with any of the ACMA registrar for endorsement on fibre cabling.

The student will cover the installation and modification of high performance data communication optical fibre cabling in building and premises and intended for connection of a telecommunications network.

Delivery location, important dates and study options

All year round

Thornlie - No future dates at present

Overview

Units

Overview
Where Thornlie
How Full Time
Enquire now
Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

All year round

Thornlie - No future dates at present

Overview

Units

Overview
Where Thornlie
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Testing and Tagging of Portable RCD's

State ID: S0063P

On completion of this course you will have the skills and knowledge to test and tag RCD's in accordance with AS/NZS 3760:2010.

Work Health and Safety Regulations state all businesses must have a RCD protecting all hostile circuits that must be tested to ensure it will respond in a timely manner during fault situations.

 

 

Delivery location, important dates and study options

All year round

Rockingham - No future dates at present

Overview

Units

Overview
Where Rockingham
How Part Time
Self Paced
Enquire now
Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Testing and Tagging - Using a Portable Appliance Tester

State ID: S0062P

This course will provide you with the skills and knowledge required to meet AS/NZS 3760 the Australian standard on testing and tagging for Test and Tag.

The course delivers the required knowledge and skills necessary to:

  • Work safely using a portable appliance tester 
  • identify faults 
  • arrange for repair of faulty equipment
  • apply tagging and
  • complete test documentation.

Delivery location, important dates and study options

All year round

Rockingham - No future dates at present

Overview

Units

Overview
Where Rockingham
How Part Time
Self Paced
Enquire now
Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Certificate III in Electrotechnology Electrician

National ID: UEE30811 | State ID: A123

Are you looking for an electrical career and current skills?

When you complete the Certificate III in Electrotechnology Electrician you'll be looking at a career as a licensed electrician (additional requirements apply).

Entrance Requirements

Job opportunities

Entrance Requirements

 

This course is available as an apprenticeship.

Entrance requirements for apprenticeships

You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship. 

An apprenticeship involves full time work with an employer who provides an opportunity to learn all aspects of a trade. This is a structured program for a fixed period of time and while you learn on the job, you also attend off the job training at SM TAFE.

Some of the benefits of an Apprenticeship are that you can:

  • Earn a wage while you train
  • Learn on the job skills combined with off the job training
  • Receive a nationally recognised qualification on successful completion
  • Start a valuable step towards a rewarding career path

 

Job opportunities

 

  • When you complete the Certificate III in Electrotechnology Electrician you'll be looking at a career as a licensed electrician (additional requirements apply).

 

 

For information about jobs and pathways, please see http://joboutlook.gov.au/

 

Further study opportunities:

 

  • MEM40105 Certificate IV in Engineering (Instrumentation, State ID WT46

 

Delivery location, important dates and study options

All year round

Rockingham - Classroom-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 36 months
When All year round
Where Rockingham
How Apprenticeship
Part Time
Apply now
Let us help you make the approach to an employer to become their apprentice or trainee.
Rockingham - Self Paced-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 36 months
When All year round
Where Rockingham
How Apprenticeship
Part Time
Apply now
Let us help you make the approach to an employer to become their apprentice or trainee.
Thornlie - Classroom-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 36 months
When All year round
Where Thornlie
How Apprenticeship
Part Time
Apply now
Let us help you make the approach to an employer to become their apprentice or trainee.

All year round

Rockingham - Classroom-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 36 months
When All year round
Where Rockingham
How Part Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Thornlie - Classroom-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 36 months
When All year round
Where Thornlie
How Part Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Operation (Electrical) Legislative Requirements

State ID: S0060P

Full Electrical Contractors Course

To be eligible you must hold a current electrical workers licence, restricted licence is not acceptable.

The full electrical contractors course includes both nominee and business components.

  • Nominee component includes five days face to face
  • Business component includes online learning plus one day of assessment maximum six months to complete

Business and Nominee contractors courses can be completed separately.

Delivery location, important dates and study options

All year round

Thornlie - No future dates at present

Overview

Units

Overview
Where Thornlie
How Part Time
Enquire now
Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

All year round

Thornlie - Part Time-Classroom-FFS-Short Course

Overview

Units

Overview
Where Thornlie
How Part Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2

Thornlie - 18 - 22 November 2019

Overview

Units

Overview
Duration 5 days
Where Thornlie
How Part Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Thornlie - 21 - 25 October 2019

Overview

Units

Overview
Duration 5 days
Where Thornlie
How Part Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Establishing a Contracting Business

State ID: S0058P

Full Electrical Contractors Course

To be eligible you must hold a current electrical workers licence, restricted licence is not acceptable.

The full electrical contractors course includes both nominee and business components.

  • Nominee component includes five days face to face
  • Business component includes online learning plus one day of assessment maximum six months to complete

Business and Nominee contractors courses can be completed separately.

Delivery location, important dates and study options

All year round

Thornlie - All year round

Overview

Units

Overview
Where Thornlie
How Part Time
Self Paced
Enquire now
Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

All year round

Thornlie - Part Time-External-Commercial-Short Course

Overview

Units

Overview
Where Thornlie
How Part Time
Self Paced
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2

Thornlie - 18 - 22 November 2019

Overview

Units

Overview
Duration 6 months
Where Thornlie
How Part Time
Self Paced
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Thornlie - 21 - 25 October 2019

Overview

Units

Overview
Duration 6 months
Where Thornlie
How Part Time
Self Paced
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Thornlie - August 2019 intake 6 Months

Overview

Units

Overview
Duration 6 months
Where Thornlie
How Part Time
Self Paced
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Thornlie - July 2019 intake 6 months

Overview

Units

Overview
Duration 6 months
Where Thornlie
How Part Time
Self Paced
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Pages