COVID-19 updates
Home | Sub Study Area | Electrical and Electrotechnology

Electrical and Electrotechnology

Electrical Requirements

State ID: S0166P

Full Electrical Contractors Course

To be eligible you must hold a current electrical workers licence, restricted licence is not acceptable.

The full electrical contractors course includes both nominee and business components.

  • Nominee component includes five days face to face
  • Business component includes online learning plus one day of assessment maximum six months to complete

Business and Nominee contractors courses can be completed separately.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

All year round

Thornlie - Part Time-Classroom-FFS-Short Course

Overview

Units

Overview
Where Thornlie
How Part Time
Enquire now
Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. This enquiry form will not be suitable as an application for a full time or part time course.

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Electrical Contractors Nominees Licence/Electrical Contractors Licence Course

State ID: S0010P

Full Electrical Contractors Course

The full electrical contractors course includes both nominee and business components.

Course content

This Electrical Licensing Board-approved course provides theoretical and practical training and is designed to enhance participants’ existing skill sets. The program will not only build upon your current electrical trade studies, it will also improve and refresh your knowledge of:

Entrance Requirements

Entrance Requirements

To be eligible you must hold a current electrical workers licence, restricted licence is not acceptable.

If you are not working within an electrical contracting company, a person other than an electrical contractor may hold the business aspect of the licence. In this case, the electrical work will only be completed, under that aspect of the licence, by an electrician employed by that company and nominated by that same employer as the Nominees/In-house Licence holder.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. This enquiry form will not be suitable as an application for a full time or part time course.

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Certificate IV in Electrical - Instrumentation

National ID: UEE40411 | State ID: A135

Our Certificate IV in Electrical (Instrumentation) provides eligible persons with the training, skills and knowledge to install, commission, calibrate and maintain modern instrumentation and control systems. This may include loop tuning of multi controller or multi element systems and PLC training where required. 

This course will be of interest to unrestricted electricians, or electrical apprentices in their third or fourth year of study. 

Job opportunities

Study pathway

Job opportunities

Successful completion of this qualification provides you with the opportunity to gain employment in the engineering industry or continue study to become an engineering associate in the instrumentation and control field.

Study pathway

Successful completion of this qualification provides you with the opportunity to gain employment in the engineering industry or continue study to become an engineering associate in the instrumentation and control field.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

All year round

Munster - Classroom-Traineeship

Overview

Fees and charges

Units

Overview
Duration 2 semesters
When All year round
Where Munster
How Part Time
Traineeship
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. This enquiry form will not be suitable as an application for a full time or part time course.

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Operation (Electrical) Legislative Requirements

State ID: S0060P

Full Electrical Contractors Course

To be eligible you must hold a current electrical workers licence, restricted licence is not acceptable.

The full electrical contractors course includes both nominee and business components.

  • Nominee component includes five days face to face
  • Business component includes online learning plus one day of assessment maximum six months to complete

Business and Nominee contractors courses can be completed separately.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

All year round

Thornlie - No future dates at present

Overview

Units

Overview
Where Thornlie
How Part Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. This enquiry form will not be suitable as an application for a full time or part time course.

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

General Legislative Requirements

State ID: S0059P

Full Electrical Contractors Course

To be eligible you must hold a current electrical workers licence, restricted licence is not acceptable.

The full electrical contractors course includes both nominee and business components.

  • Nominee component includes five days face to face
  • Business component includes online learning plus one day of assessment maximum six months to complete

Business and Nominee contractors courses can be completed separately.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

All year round

Thornlie - Part Time-External-Commercial-Short Course

Overview

Units

Overview
Where Thornlie
How Part Time
Self Paced
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. This enquiry form will not be suitable as an application for a full time or part time course.

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Electrical Trade Revision

State ID: S0057P

The Electrical Trade Revision course is for 4th year apprentices. The aim of the course is to provide apprentices the opportunity to review and revise the electrical principles and essential performance criteria they have covered in the past 4 years.

The following subjects are covered:

  • Technical Standards
  • Installation testing and isolation procedures
  • Maximum demand
  • Cable selection
  • Circuit protection
  • Appliance testing
  • Electrical theory

 

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

All year round

Thornlie - Part Time-Classroom-Short Course-Electrical Revision-Thornlie

Overview

Units

Overview
Duration 1 days
Where Thornlie
How Part Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. This enquiry form will not be suitable as an application for a full time or part time course.

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Certificate IV in Engineering (Instrumentation)

National ID: MEM40105 | State ID: WT46

Are you working in the engineering industry and looking to advance your career further? The Certificate IV in Engineering (Instrumentation) has been specifically designed for any qualified tradesperson such as unrestricted electricians, electrical fitters, engineers in the resource industry, refrigeration technicians, or for apprentices in their third or fourth year of study. Learn to install, commission, calibrate and maintain modern instrumentation and control systems, as well as loop turning of multi controller or multi element systems.

Job opportunities

Study pathway

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

All year round

Munster - Part Time-Self Paced

Overview

Fees and charges

Units

Overview
Duration 24 months
When All year round
Where Munster
How Part Time
Self Paced
Get started
This course is available to start anytime for online study. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. This enquiry form will not be suitable as an application for a full time or part time course.

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Data Communications - Install and Modify Performance Data Communication Structured Cabling

National ID: UEESS00052 | State ID: AB672

To enrol into this course you must already have an Open Cabling registration.
UEENEEF105A - Install and modify optical fibre performance data communication cabling.

On completion of this unit of competency the student will be able to register with any of the ACMA registrar for endorsement on fibre cabling.

The student will cover the installation and modification of high performance data communication optical fibre cabling in building and premises and intended for connection of a telecommunications network.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

All year round

Thornlie - No future dates at present

Overview

Units

Overview
Where Thornlie
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. This enquiry form will not be suitable as an application for a full time or part time course.

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Certificate II in Electrotechnology (Career Start) (Electrotechnology Pre-Apprenticeship)

National ID: UEE22011 | State ID: AA41

Are you looking for an electrical career and current skills?

When you complete the Certificate II in Electrotechnology (Career Start)(Electrotechnology Pre-Apprenticeship) you'll be what employers are looking for as an apprentice in the electrical, instrumentation or electrical servicing trades.

You will gain the knowledge and practical skills to:

Work placement

Important information

Job opportunities

Study pathway

Work placement

Work placement is a requirement for this course

Please be aware that industries and employers have been affected by the COVID-19 pandemic which has meant that in some cases it may not be currently possible to place students in a prospective employment opportunity. If that occurs, students will be able to complete training in a simulated workplace on campus.

 

Important information

One of the units of this course will be to obtain a white card which is a requirement to work onsite in the construction industry.

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. In addition, this course involves work placement, giving you further opportunity to develop relationships with potential employers. We endeavour to assist students into a career pathway, but please be aware that employment is not guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

Semester 1

Rockingham - Full Time-Classroom-Pre-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 1
Where Rockingham
How Full Time
Apply now
This competitive course uses TAFE Admissions. Applications received after 15 June will be considered as expressions of interest for remaining places after 29 June. 
Thornlie - Full Time-Classroom-Pre-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 1
Where Thornlie
How Full Time
Apply now
This competitive course uses TAFE Admissions. Applications received after 15 June will be considered as expressions of interest for remaining places after 29 June. 

Semester 2

Mandurah - Full Time-Classroom-Pre-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 2
Where Mandurah
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Rockingham - Full Time-Classroom-Pre-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 2
Where Rockingham
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Thornlie - Full Time-Classroom-Pre-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 2
Where Thornlie
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. This enquiry form will not be suitable as an application for a full time or part time course.

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Diploma of Electronics and Communications Engineering

National ID: UEE50511 | State ID: A160

Are you ready to join the ranks of electronics professionals?

Advance your career in electronics and communications with the Diploma of Electronics and Communications Engineering.  With this technical qualification, you will gain specialised knowledge and extensive skills across the electrical engineering field to progress towards a career as an engineering associate, technical officer, or electronic systems technician. Our purpose-built facility features advanced technologies and equipment to ensure students are learning in an industry-standard setting. 

Find out why automation is a 'job of the future'

Job opportunities

Study pathway

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Study pathway

Become a specialist in your field with university study

This course has a university study pathway as at 28 October 2019.

Curtin University – Bachelor of Science (Multidisciplinary Science) – 100 Credits

Curtin University – Bachelor of Science (Computing) – 50 Credits

The information about university credit points and tuition costs provides a general guide only. To check the current credit arrangements and to find more information about how credits work at the listed university of your choice, visit TAFE International WA’s University Pathway Finder.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

All year round

Thornlie - Classroom-Traineeship

Overview

Fees and charges

Units

Overview
Duration 3 semesters
When All year round
Where Thornlie
How Part Time
Traineeship
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 1

Thornlie - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 3 semesters
When Semester 1
Where Thornlie
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2

Thornlie - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 3 semesters
When Semester 2
Where Thornlie
How Full Time
Apply now
This course uses TAFE Admissions. Applications received after 15 June will be considered as expressions of interest for remaining places.  

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. This enquiry form will not be suitable as an application for a full time or part time course.

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Pages