COVID-19 updates
Home | Study Mode | Full Time

Full Time

Advanced Diploma of Process Plant Technology

National ID: PMA60116 | State ID: BAM9

The Advanced Diploma of Process Plant Technology PMA60116 is an advanced qualification for both school leavers and/or industry professionals looking to progress through to university studies and/or advance their career standing.

See how our students learn in a real-life industry setting equipped with an operating plant! 

Job opportunities

Study pathway

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Study pathway

Become a specialist in your field with university study

This course has a university study pathway as at 11 October 2019.

Edith Cowan University – Bachelor of Engineering (Chemical and Environmental) – Up to 75

Edith Cowan University – Bachelor of Engineering (Petroleum Engineering) – Up to 75

The information about university credit points and tuition costs provides a general guide only. To check the current credit arrangements and to find more information about how credits work at the listed university of your choice, visit TAFE International WA’s University Pathway Finder.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

Semester 1

Munster - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 year
When Semester 1
Where Munster
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2

Munster - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 2 semesters
When Semester 2
Where Munster
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. This enquiry form will not be suitable as an application for a full time or part time course.

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Advanced Diploma of Civil Construction Design

National ID: RII60515 | State ID: AZA8

Construct your future 

Job opportunities

Study pathway

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Study pathway

Become a specialist in your field with university study

This course has a university study pathway as at 30 October 2019.

Curtin University– Bachelor of Engineering (Honours) (Civil and Construction) – 150-200 Credits

Edith Cowan University – Bachelor of Engineering – Up to 90 Credits

Curtin University – Bachelor of Science (Multidisciplinary Science) – 150 Credits

Edith Cowan University – Bachelor of Commerce – Up to 120 Credits

The information about university credit points and tuition costs provides a general guide only. To check the current credit arrangements and to find more information about how credits work at the listed university of your choice, visit TAFE International WA’s University Pathway Finder.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

All year round

Munster - Classroom-Traineeship

Overview

Fees and charges

Units

Overview
Duration 3 years
When All year round
Where Munster
How Part Time
Traineeship
Apply now
Let us help you make the approach to an employer to become their apprentice or trainee.

Semester 1

Munster - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 1
Where Munster
How Full Time
Apply now
This course uses TAFE Admissions. Applications received after 15 June will be considered as expressions of interest for remaining places.  

Semester 2

Munster - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 2
Where Munster
How Full Time
Apply now
This course uses TAFE Admissions. Applications received after 15 June will be considered as expressions of interest for remaining places.  

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. This enquiry form will not be suitable as an application for a full time or part time course.

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Advanced Diploma of Maritime Operations (Master Unlimited)

National ID: MAR60315 | State ID: AWN9

This certificate allows you to perform the duties or functions of Master, Chief mate or Watchkeeper deck officer on ships of any gross tonnage in any operating area.

Holding a Watchkeeper deck or Master less than 500 GT certificate of competency may allow you to receive up to 15 units credit or recognition of prior learning with continued sea service and competencies. This may potentially reduce the duration of the course up to 14 weeks.

Job opportunities

Job opportunities

 

  • This qualification is aligned to the educational requirement for certification as a Master Unlimited as described in Marine Orders Part 3: Seagoing Qualifications (Version 6) under the Navigation Act 1912

 

 

For information about jobs and pathways, please see http://joboutlook.gov.au/

 

Further study opportunities:

 

  • University

 

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

Semester 1

Fremantle - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 3 semesters
When Semester 1
Where Fremantle
How Full Time
Apply now
This competitive course uses TAFE Admissions. Applications received after 15 June will be considered as expressions of interest for remaining places after 29 June. 

Semester 2

Fremantle - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 3 semesters
When Semester 2
Where Fremantle
How Full Time
Apply now
This competitive course uses TAFE Admissions. Applications received after 15 June will be considered as expressions of interest for remaining places after 29 June. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. This enquiry form will not be suitable as an application for a full time or part time course.

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Advanced Diploma of Maritime Operations (Marine Engineering Class 2)

National ID: MAR60115 | State ID: AVQ3

This certificate enables you to work as an engineer on any propulsion power vessel in any operating area performing the functions of:

Job opportunities

Job opportunities

 

 

For information about jobs and pathways, please see http://joboutlook.gov.au/

 

Further study opportunities:

 

  • MAR60215 Advanced Diploma of Maritime Operations (Marine Engineering Class 1), State ID AVQ0

 

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

Semester 1

Fremantle - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 year
When Semester 1
Where Fremantle
How Full Time
Apply now
This competitive course uses TAFE Admissions. Applications received after 15 June will be considered as expressions of interest for remaining places after 29 June. 

Semester 2

Fremantle - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 year
When Semester 2
Where Fremantle
How Full Time
Apply now
This competitive course uses TAFE Admissions. Applications received after 15 June will be considered as expressions of interest for remaining places after 29 June. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. This enquiry form will not be suitable as an application for a full time or part time course.

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Certificate II in Automotive Body Repair Technology (Panel Beating Pre-Apprenticeship)

National ID: AUR20916 | State ID: AB09

Are you revved up for a career in giving cars their shine?

When you complete the Certificate II in Automotive Body Repair Technology (Panel Beating Painting Pre-Apprenticeship) you'll have what employers are looking for in an apprentice auto body repairer/panel beater.

You will have the skills and knowledge to work effectively in the automotive industry,

Learn how to restore vehicles while working in an ever evolving industry.

Work placement

Important information

Job opportunities

Study pathway

Work placement

Work placement is a requirement for this course

Please be aware that industries and employers have been affected by the COVID-19 pandemic which has meant that in some cases it may not be currently possible to place students in a prospective employment opportunity. If that occurs, students will be able to complete training in a simulated workplace on campus.

Important information

South Metropolitan TAFE's Carlisle Campus is WA's major centre for automotive and panel beating studies. Automotive apprentices and pre-apprentices enjoy state of the art facilities, including new vehicles, specialised repair and diagnostic equipment, fully equipped spray painting ovens, specialised workrooms and workshops. This excellent training program is highly competitive.

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

Semester 1

Carlisle - Full Time-Classroom-Pre-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 9 months
When Semester 1
Where Carlisle
How Full Time
Find out more
This course in this study mode is full in Semester 2. See other study options or applications for this course open again in September for Semester 1 study, 2021.

Semester 2

Carlisle - Full Time-Classroom-Pre-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 6 months
When Semester 2
Where Carlisle
How Full Time
Apply now
This competitive course uses TAFE Admissions. Applications received after 15 June will be considered as expressions of interest for remaining places after 29 June. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. This enquiry form will not be suitable as an application for a full time or part time course.

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Certificate II in Automotive Body Repair Technology (Vehicle Body Painting Pre-Apprenticeship)

National ID: AUR20916 | State ID: AB08

Are you revved up for a career in giving cars their shine?

When you complete the Certificate II in Automotive Body Repair Technology (Vehicle Body Painting Pre-Apprenticeship) you'll have what employers are looking for in an apprentice auto body repairer/painter.

You will have the skills and knowledge to work effectively in the automotive industry, preparing vehicle panels for painting, removing and repairing panels, environmental regulations, and workplace safety and health.

Work placement

Work placement

Work placement is a requirement for this course

Please be aware that industries and employers have been affected by the COVID-19 pandemic which has meant that in some cases it may not be currently possible to place students in a prospective employment opportunity. If that occurs, students will be able to complete training in a simulated workplace on campus.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

Semester 1

Carlisle - Full Time-Classroom-Pre-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 1
Where Carlisle
How Full Time
Find out more
This course in this study mode is full in Semester 2. See other study options or applications for this course open again in September for Semester 1 study, 2021.

Semester 2

Carlisle - Full Time-Classroom-Pre-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 2
Where Carlisle
How Full Time
Apply now
This competitive course uses TAFE Admissions. Applications received after 15 June will be considered as expressions of interest for remaining places after 29 June. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. This enquiry form will not be suitable as an application for a full time or part time course.

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Certificate II in Automotive Electrical Technology (Automotive Electrical Pre-Apprenticeship)

National ID: AUR20416 | State ID: AB03

Are you revved up for a career giving cars their spark?

When you complete the Certificate II in Automotive Electrical Technology (Automotive Electrical Pre-Apprenticeship) you'll have what employers are looking for in an apprentice automotive electrician.

You will have the following skills and knowledge to work effectively in the automotive industry:

Work placement

Important information

Job opportunities

Study pathway

Work placement

Work placement is a requirement for this course

This course has a mandatory work placement component that all students must complete. South Metropolitan TAFE will assist students in finding a suitable work placement by working with our industry partners. Please be aware that industries and employers have been affected by the COVID-19 pandemic which has meant that some work placements have been cancelled, put on hold or student places significantly reduced. While every effort is being made to work with our industry partners to secure work placements during this unprecedented time, there may be delays in students being placed. As a result of these delays some students may take longer than the expected time to complete their course. Lecturing staff will keep all students up to date, and will inform students if this may affect them and cause a delay in finishing their course.

Important information

South Metropolitan TAFE is the only TAFE in WA offering this qualification.

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

Semester 1

Carlisle - Full Time-Classroom-Pre-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 1
Where Carlisle
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Kwinana - Full Time-Classroom-Pre-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 1
Where Kwinana
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2

Carlisle - Full Time-Classroom-Pre-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 2
Where Carlisle
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Kwinana - Full Time-Classroom-Pre-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 2
Where Kwinana
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. This enquiry form will not be suitable as an application for a full time or part time course.

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Advanced Diploma of Engineering Technology - Electrical

National ID: UEE62111 | State ID: A175

This course leads to a job of the future with STEM skills highly prized in the implementation of smart homes (Internet of Things), automated industrial production line mechatronics, administering or upgrading infrastructure for small to large scale businesses among many other innovative applications.

Find out why automation is a 'job of the future'

Job opportunities

Study pathway

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Study pathway

Part time study is available by enrolling in the three skill sets listed above, which make up the Diploma qualification and provide credit for this Advanced qualification.

Become a specialist in your field with university study

This course has a university study pathway as at 14 August 2019.

Curtin University – Bachelor of Engineering (Honours) – 150-200 credits

Curtin University – Bachelor of Science (Multidisciplinary Science) – 150 credits

Edith Cowan University – Bachelor of Engineering (Electrical and Renewable Energy) (W21) – Up to 120 credits

Edith Cowan University – Bachelor of Engineering (Electrical Power) (Y49) – Up to 120 credits

Edith Cowan University – Bachelor of Engineering (Electronics and Communications) (Y51) – Up to 120 credits

Edith Cowan University – Bachelor of Engineering (Instrumentation Control & Automation) (Y46) – Up to 120 credits

Murdoch University – Bachelor of Engineering (Honours) in Industrial Computer Systems Engineering (H1264) – 6 credits

Murdoch University – Bachelor of Engineering (Honours) in Instrumentation and Control Engineering (H1264) – 6 credits

Murdoch University – Bachelor of Engineering (Honours) in Renewable Energy Engineering (H1264) – 6 credits

The information about university credit points and tuition costs provides a general guide only. To check the current credit arrangements and to find more information about how credits work at the listed university of your choice, visit TAFE International WA’s University Pathway Finder.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

All year round

Munster - Part Time-Self Paced-Online

Overview

Fees and charges

Units

Overview
Duration 24 months
When All year round
Where Munster
How Part Time
Self Paced
Get started
This course is available to start anytime for online study. 
Munster - Part Time-Self Paced-Onsite

Overview

Fees and charges

Units

Overview
Duration 24 months
When All year round
Where Munster
How Part Time
Get started
This course is available to start anytime for online study. 

Semester 1

Munster - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 2 years
When Semester 1
Where Munster
How Full Time
Apply now
This course uses TAFE Admissions. Applications received after 15 June will be considered as expressions of interest for remaining places.  

Semester 2

Munster - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 2 years
When Semester 2
Where Munster
How Full Time
Apply now
This course uses TAFE Admissions. Applications received after 15 June will be considered as expressions of interest for remaining places.  

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. This enquiry form will not be suitable as an application for a full time or part time course.

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Certificate II in Baking (Baking Pre-Apprenticeship)

National ID: FBP20217 | State ID: AB57

Want to start a career in baking?

When you complete the Certificate II in Baking (Baking Pre-Apprenticeship) you will be ready for an apprenticeship in the baking industry.

You will gain the knowledge and skills to make and bake pastry, bread, meringues, and doughnuts. You will also learn about customer service, first aid, hygiene and workplace health and safety.

We are the only provider offering training in baking with an on-campus bakehouse sells students' work to the general public.

Work placement

Job opportunities

Work placement

Work placement is a requirement for this course

Please be aware that industries and employers have been affected by the COVID-19 pandemic which has meant that in some cases it may not be currently possible to place students in a prospective employment opportunity. If that occurs, students will be able to complete training in a simulated workplace on campus.

Job opportunities

 

  • When you complete the Certificate II in Baking (Baking Pre-Apprenticeship) you will be ready to rise up to an apprenticeship in the baking industry.

 

 

For information about jobs and pathways, please see http://joboutlook.gov.au/

 

Further study opportunities:

 

  • FDF30510 Certificate III in Retail Baking (Cake and Pastry ), State ID S769 (Apprenticeship)
  • FDF30610 Certificate III in Retail Baking (Bread) , State ID S770 (Apprenticeship)
  • FDF30710 Certificate III in Retail Baking (Combined) , State ID S771 (Apprenticeship)

 

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

Semester 1

Bentley - Full Time-Classroom-Pre-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 1
Where Bentley
How Full Time
Apply now
This course uses TAFE Admissions. Applications received after 15 June will be considered as expressions of interest for remaining places.  

Semester 2

Bentley - Full Time-Classroom-Pre-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 2
Where Bentley
How Full Time
Apply now
This course uses TAFE Admissions. Applications received after 15 June will be considered as expressions of interest for remaining places.  

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. This enquiry form will not be suitable as an application for a full time or part time course.

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Certificate II in Building and Construction (Pathway - Trades) (Brick and Block Laying Pre-Apprenticeship)

National ID: 52824WA | State ID: AB25

Do you want an outdoor trades career with a chance of making great things?

When you complete this Certificate II in Building and Construction pre-apprenticeship you'll be what employers are looking for as an apprentice bricklayer/blocklayer.

You will gain the following knowledge and skills to work effectively in the building industry: 

Work placement

Important information

Job opportunities

Study pathway

Work placement

Work placement is a requirement for this course

Please be aware that industries and employers have been affected by the COVID-19 pandemic which has meant that in some cases it may not be currently possible to place students in a prospective employment opportunity. If that occurs, students will be able to complete training in a simulated workplace on campus.

Important information

One of the units of this course will be to obtain a white card which is a requirement to work onsite in the construction industry.

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. In addition, this course involves work placement, giving you further opportunity to develop relationships with potential employers. We endeavour to assist students into a career pathway, but please be aware that employment is not guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

Semester 1

Mandurah - Full Time-Classroom-Pre-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 1
Where Mandurah
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Rockingham - Full Time-Classroom-Pre-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 1
Where Rockingham
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Thornlie - Full Time-Classroom-Pre-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 1
Where Thornlie
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2

Mandurah - Full Time-Classroom-Pre-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 2
Where Mandurah
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Rockingham - Full Time-Classroom-Pre-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 2
Where Rockingham
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Thornlie - Full Time-Classroom-Pre-Apprenticeship

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 2
Where Thornlie
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. This enquiry form will not be suitable as an application for a full time or part time course.

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Pages