Home | Study Area | Engineering and Mining

Engineering and Mining

Industry icon: 

Certificate IV in Engineering

National ID: MEM40105 | State ID: W245

The Certificate IV in Engineering specifies the competencies required for employment as a Higher Engineering Tradesperson or a Special Class Engineering Tradesperson - Level II in mechanical, electrical/electronic or fabrication trade disciplines. The job role involves application of additional skills in the learner's trade or cross skills from other trades.

Job opportunities

Study pathway

Job opportunities

This qualification is designed to reflect the role of team leaders and supervisors in the industry sector.

Study pathway

This qualification will allow you to undertake post trade studies in a range of specialisations to enhance your trade specialization, or to move into another specialisation. The opportunity for specialising technically or moving into a more technical supervisor position is available with further flexibility at the Diploma level.

Delivery location, important dates and study options

All year round

Rockingham - Part Time-Self Paced

Overview

Fees and charges

Units

Overview
When All year round
Where Rockingham
How Part Time
Self Paced
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Industrial Control System Programming Skill Set

State ID: GAB03

This skill set is a part of the UEE62111 Advanced Diploma of Engineering Technology (Electrical) and it is designed to develop your skills in computer based measurement, programming and control by exploring PLC and SCADA systems. The strong laboratory and project based approach provides students with practical experience in using these systems in an industry environment. Students will gain experience in working with a small scale system involving designing, programming, fault finding, testing and networking.

Job opportunities

Study pathway

Job opportunities

On completion of this skill set you will receive a statement of attainment and may be able to work as an Automation Technician/Programmer or Building Control System Technician/Programmer. If you have any relevant experience, you may be able to work as a PLC/SCADA Programmer.

For information about jobs and pathways, please see
http://joboutlook.gov.au/

Study pathway

This skill set is 1 of 5 evening skill sets offered. Completion of all 5 skill sets will achieve Advanced Diploma of Engineering Technology - Electrical - UEE62111

Delivery location, important dates and study options

This course is available for study starting term 1 and term 3 in 2020 with a mix of online study and attendance at Munster campus for workshops. 

This skill set is part of the UEE62111 Advanced Diploma of Engineering Technology - Electrical.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Certificate IV in Electrical - Instrumentation

National ID: UEE40411 | State ID: A135

Our Certificate IV in Electrical (Instrumentation) provides eligible persons with the training, skills and knowledge to install, commission, calibrate and maintain modern instrumentation and control systems. This may include loop tuning of multi controller or multi element systems and PLC training where required. 

This course will be of interest to unrestricted electricians, or electrical apprentices in their third or fourth year of study. 

Job opportunities

Study pathway

Job opportunities

Successful completion of this qualification provides you with the opportunity to gain employment in the engineering industry or continue study to become an engineering associate in the instrumentation and control field.

Study pathway

Successful completion of this qualification provides you with the opportunity to gain employment in the engineering industry or continue study to become an engineering associate in the instrumentation and control field.

Delivery location, important dates and study options

All year round

Munster - Part Time-Self Paced-Onsite

Overview

Fees and charges

Units

Overview
Duration 6 months
When All year round
Where Munster
How Part Time
Get started
This course is available to start anytime for online study. 
Rockingham - Part Time-Self Paced-Onsite

Overview

Fees and charges

Units

Overview
Duration 6 months
When All year round
Where Rockingham
How Part Time
Get started
This course is available to start anytime for online study. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Certificate II in Split Air-conditioning and Heat Pump Systems

National ID: UEE20111 | State ID: D632

Do you want a career bringing comfort into the home?

When you complete this Certificate II in Split Air-conditioning and Heat Pump Systems you'll be what employers are looking for as a split system installer or air-conditioner installer.

You will gain the knowledge and skills to:

Job opportunities

Study pathway

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Delivery location, important dates and study options

All year round

Carlisle - Part Time-Classroom

Overview

Fees and charges

Units

Overview
When All year round
Where Carlisle
How Part Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Welding Introduction

State ID: S0017P

The Welding Introduction course is for candidates who have never welded before and provides an opportunity for candidates to try a range of welding processes over a five week course.

In this introduction to welding course you will have access to gas metal and arc welding (GMAW), manual metal arc welding (MMAW) and oxy welding in a fully equipped workshop.

Job opportunities

Job opportunities

The Welding Introduction course is for candidates who have never welded before and provides an opportunity for candidates to try a range of welding processes over a five week course.

 

For information about jobs and pathways, please see http://joboutlook.gov.au/

 

Further study opportunities:

 

Delivery location, important dates and study options

Semester 2

Thornlie - 9 October - 6 November 2019

Overview

Units

Overview
Duration 5 weeks
Where Thornlie
How Part Time
Fee
Non concession:
$525.00
Enquire now
Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.
Thornlie - 13 November - 11 December 2019

Overview

Units

Overview
Duration 5 weeks
Where Thornlie
How Part Time
Fee
Non concession:
$525.00
Enquire now
Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Diploma of Engineering - Technical (HVAC)

National ID: MEM50212 | State ID: WB87

Are you ready for a technical career that is neither too hot nor too cold?

When you complete the Diploma of Engineering – Technical (HVAC) you'll have specialist skills in heating, ventilation and air conditioning systems, as a mechanical design engineer, sales consultant, or project manager.

Delivery location, important dates and study options

All year round

Carlisle - Part Time-Self Paced

Overview

Fees and charges

Units

Overview
Duration 12 months
When All year round
Where Carlisle
How Part Time
Self Paced
Get started
This course is available to start anytime for online study. 

Semester 1

Carlisle - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 2 semesters
When Semester 1
Where Carlisle
How Full Time
Apply now
This course uses TAFE Admissions. Express your interest in remaining places in Semester 1. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Diploma of Engineering - Advanced Trade

National ID: MEM50105 | State ID: W247

Are you ready for an advanced engineering career?

When you complete the Diploma of Engineering - Advanced Trade you'll have specialist skills as an advanced tradesperson.

At Carlisle Campus this course is taught with an HVAC (Heating, Ventilation & Air Conditioning) focus.

You will gain the advanced skills and knowledge to interpret technical manuals, write technical reports, research and analyse engineering data, and workplace health and safety.

Delivery location, important dates and study options

All year round

Carlisle - Part Time-Self Paced

Overview

Fees and charges

Units

Overview
Duration 24 months
When All year round
Where Carlisle
How Part Time
Self Paced
Get started
This course is available to start anytime for online study. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Certificate IV in Engineering (Skills Set - HVAC Commissioning)

National ID: MEM40105 | State ID: WT56

Are you looking to turn your air-conditioning career up a notch?

Take the next step and learn how to install and commission HVAC. 

The Certificate IV HVAC Commissioning will prepare you for work with today’s computer controlled HVAC systems. Subjects covered will include: AHU’s, VAV’s, Chillers, Cooling Towers and ancillary equipment. Learn your way around a BMS system. You will, air balance, water balance as well as; fully install commission and optimise a VAV-AHU (using the BMS).

Delivery location, important dates and study options

All year round

Carlisle - Part Time-Self Paced

Overview

Fees and charges

Units

Overview
When All year round
Where Carlisle
How Part Time
Self Paced
Get started
This course is available to start anytime for online study. 

Semester 1

Carlisle - Part Time-Self Paced

Overview

Fees and charges

Units

Overview
When Semester 1
Where Carlisle
How Part Time
Self Paced
Get started
This course is available to start anytime for online study. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Certificate IV in Engineering (Instrumentation)

National ID: MEM40105 | State ID: WT46

Are you working in the engineering industry and looking to advance your career further? The Certificate IV in Engineering (Instrumentation) has been specifically designed for any qualified tradesperson such as unrestricted electricians, electrical fitters, engineers in the resource industry, refrigeration technicians, or for apprentices in their third or fourth year of study. Learn to install, commission, calibrate and maintain modern instrumentation and control systems, as well as loop turning of multi controller or multi element systems.

Job opportunities

Study pathway

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Delivery location, important dates and study options

All year round

Munster - Part Time-Self Paced External-Commercial

Overview

Fees and charges

Units

Overview
Duration 24 months
When All year round
Where Munster
How Part Time
Self Paced
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

All year round

Munster - Part Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 24 months
When All year round
Where Munster
How Part Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Munster - Part Time-Self Paced

Overview

Fees and charges

Units

Overview
Duration 24 months
When All year round
Where Munster
How Part Time
Self Paced
Get started
This course is available to start anytime for online study. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Certificate IV in Process Plant Technology

National ID: PMA40116 | State ID: BAN0

Our PMA40116 Certificate IV in Process Plant Operations is a technical qualification for advanced operators and operations technicians who use production equipment to directly produce product. Technicians undertaking the course will typically be involved in solving complex problems requiring theoretical knowledge, combined with an understanding of the production process and equipment across the plant. It is especially suited to advanced operators and/or operations technicians who are wanting to further their career in a supervisory or team leader role.

See how our students learn in a real-life industry setting equipped with an operating plant! 

Job opportunities

Job opportunities

 

  • This qualification is typically used to develop employees performing a technical role that includes an ability to work independently and conduct technical problem solving according to the needs of the work in the manufactured mineral products industries.

 

 

For information about jobs and pathways, please see http://joboutlook.gov.au/

 

Further study opportunities:

 

  • PMA50116 Diploma of Process Plant Technology, State ID BAN5

 

Delivery location, important dates and study options

All year round

Munster - Part Time-Self Paced

Overview

Fees and charges

Units

Overview
When All year round
Where Munster
How Part Time
Self Paced
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.