Home | Study Area | Aerospace, Maritime and Logistics

Aerospace, Maritime and Logistics

Industry icon: 

Engineering Revalidation Part C

State ID: S0107P

If you hold an Engineer certificate of competency you should apply to us to revalidate your certificate before it expires, if it has not been suspended or revoked. Whether your certificate is valid, or has expired, the revalidation requirements are the same.

Refer to the AMSA website for further information on revalidation.

Revalidation PART B, common to Masters and Deck Officers

Prerequisites

Prerequisites
A valid or expired Australian Master or Deck Officer Certificate of Competency

Delivery location, important dates and study options

Semester 1

Fremantle - Various Dates in 2020

Overview

Units

Overview
Where Fremantle
How Part Time
Fee
Non concession:
$2,100.00
Enquire now
Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

Semester 2

Fremantle - Various Dates in 2020

Overview

Units

Overview
Where Fremantle
How Part Time
Fee
Non concession:
$2,100.00
Enquire now
Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Certificate II in Fishing Operations

National ID: SFI20219 | State ID: BEI4

Are you ready to start a career working in fishing for seafood?

Become a deckhand in the fishing industry with this pathway course to commercial fishing, operating tourist or charter boats, work boats, ferries and dive boats.

Gain these skills:

  • operation of fishing gear and equipment
  • processing and temperature control of fishing harvests
  • cleaning and maintenance of equipment and vessels
  • handling, harvesting and sorting by catch

 

Important information

Job opportunities

Important information

AMSA requires completion of the shipboard safety skill set to work on a domestic commercial vessel.

Job opportunities

   
Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Delivery location, important dates and study options

Semester 1

Fremantle - Full Time-Classroom-Local

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 1
Where Fremantle
How Full Time
Apply now
This course uses TAFE Admissions. Express your interest in remaining places in Semester 1. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Diploma of Aquaculture

National ID: SFI50119 | State ID: BEJ2

This qualification will provide you with the practical skills and knowledge to manage the operations of fish farms, marine farms and hatcheries. You will learn skills in developing and implementing a breeding strategy, planning ecologically sustainable practices, managing stock health, and developing a stock production plan. You will also learn skills in planning and designing a water supply and disposal system, and stock culture systems and structures.

Job opportunities

Study pathway

Job opportunities

   
Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Delivery location, important dates and study options

Semester 1

Fremantle - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 2 semesters
When Semester 1
Where Fremantle
How Full Time
Get started
This course is available to those already working in industry. Use the link below to have  further information sent to you.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Advanced Training for Liquified Gas Tanker Cargo Operations

State ID: S0023P

This course is for Masters, Chief Engineers and Chief Mates and provides candidates with the skills and knowledge to meet AMSA requirements for STCW Reg V/1-2 and Code Section A-V/1-2, paragraph 2, Table A-V/1-2-1.

    Please note you must hold the following prerequisites for entry into this course and evidence must be provided upon the first day of class:

    Prerequisites

    Prerequisites
    Please note you must hold the following prerequisites for entry onto this course and evidence must be provided upon first day of class: STCW Advanced Fire Fighting Certificate  STCW Gas Tanker Familiarisation Certificate

    Delivery location, important dates and study options

    Semester 1

    Fremantle - Monday 17 to Friday 21 February

    Overview

    Units

    Overview
    Where Fremantle
    How Part Time
    Apply now
    Ready to apply for this course? Check out the apply and enrol page for more information.

    Semester 2

    Fremantle - Monday 14 to Friday 18 September

    Overview

    Units

    Overview
    Where Fremantle
    How Part Time
    Fee
    Non concession:
    $2,000.00
    Enquire now
    Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.
    Fremantle - Monday 7 to Friday 11 December

    Overview

    Units

    Overview
    Where Fremantle
    How Part Time
    Fee
    Non concession:
    $2,000.00
    Enquire now
    Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

    Course enquiry

    Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

    For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

    Certificate II in Aquaculture

    National ID: SFI20119 | State ID: BEI8

    This qualification represents the base entry point into this sector of the seafood industry and provides people with a range of core and underpinning skills and knowledge relevant to work as a field hand in the aquaculture sector. 

    Job opportunities

    Study pathway

    Job opportunities

       
    Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

    To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

    Delivery location, important dates and study options

    Semester 1

    Fremantle - Full Time-Classroom

    Overview

    Fees and charges

    Units

    Overview
    Duration 1 semester
    When Semester 1
    Where Fremantle
    How Full Time
    Apply now
    Ready to apply for this course? Check out the apply and enrol page for more information.

    Course enquiry

    Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

    For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

    Certificate IV in Aeroskills (Avionics)

    National ID: MEA40618 | State ID: BDW5

    Are you looking for an in-demand career looking after the world's most advanced technology?

    When you complete the Certificate IV in Aeroskills (Avionics) you will be looking at an exciting career working on aircraft large and small as an aviation maintenance engineer. Aircraft maintenance is a key skills growth area and your qualifications are in demand worldwide.

    Entrance Requirements

    Job opportunities

    Entrance Requirements

     

    This course is available as an apprenticeship.

    Entrance requirements for apprenticeships

    You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship. 

    An apprenticeship involves full time work with an employer who provides an opportunity to learn all aspects of a trade. This is a structured program for a fixed period of time and while you learn on the job, you also attend off the job training at SM TAFE.

    Some of the benefits of an Apprenticeship are that you can:

    • Earn a wage while you train
    • Learn on the job skills combined with off the job training
    • Receive a nationally recognised qualification on successful completion
    • Start a valuable step towards a rewarding career path

     

    Job opportunities

     

    • Completion provides you with the skills and knowledge to work in the aviation industry as an avionics aircraft maintenance engineer.
    • For information on licensing requirements, please refer to CASA’s website: http://www.casa.gov.au
    • South Metropolitan TAFE does not guarantee a licensed outcome as CASA is the Australian licensing and regulatory authority.

     

     

    For information about jobs and pathways, please see http://joboutlook.gov.au/

     

    Further study opportunities:

     

    • Diploma of Aeroskills (Avionics)

    Those wishing to progress further may undertake the Diploma of Aeroskills and CASA licensing exams to become Licensed Aircraft maintenance Engineers.

    For information on licensing requirements, please refer to CASA’s website: http://www.casa.gov.au

    South Metropolitan TAFE does not guarantee a licensed outcome as CASA is the Australian licensing and regulatory authority.

     

    Delivery location, important dates and study options

    All year round

    Jandakot - Classroom-Apprenticeship

    Overview

    Fees and charges

    Units

    Overview
    Duration 4 years
    When All year round
    Where Jandakot
    How Apprenticeship
    Part Time
    Apply now
    Ready to apply for this course? Check out the apply and enrol page for more information.

    Course enquiry

    Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

    For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

    Certificate IV in Aeroskills (Mechanical)

    National ID: MEA40718 | State ID: BDW1

    Are you looking for an in-demand career looking after the world's most advanced technology?

    When you complete the Certificate IV in Aeroskills (Mechanical) you will be looking at an exciting career working on aircraft large and small as an aviation maintenance engineer. Aircraft maintenance is a key skills growth area and your qualifications are in demand worldwide.

    Entrance Requirements

    Job opportunities

    Entrance Requirements

     

    This course is available as an apprenticeship.

    Entrance requirements for apprenticeships

    You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship. 

    An apprenticeship involves full time work with an employer who provides an opportunity to learn all aspects of a trade. This is a structured program for a fixed period of time and while you learn on the job, you also attend off the job training at SM TAFE.

    Some of the benefits of an Apprenticeship are that you can:

    • Earn a wage while you train
    • Learn on the job skills combined with off the job training
    • Receive a nationally recognised qualification on successful completion
    • Start a valuable step towards a rewarding career path

     

    Job opportunities
    • Graduates who successfully complete this qualification gain the skills and knowledge to work in the aviation industry as a mechanical aircraft maintenance engineer.
    • For information on licensing requirements, please refer to CASA’s website: http://www.casa.gov.au
    • South Metropolitan TAFE does not guarantee a licensed outcome as CASA is the Australian licensing and regulatory authority.

     

     

    For information about jobs and pathways, please see http://joboutlook.gov.au/

     

    Further study opportunities:

     

    • Diploma of Aeroskills (Mechanical)

    Those wishing to progress further may undertake the Diploma of Aeroskills and CASA licensing exams to become Licensed Aircraft maintenance Engineers.

    For information on licensing requirements, please refer to CASA’s website: http://www.casa.gov.au

    South Metropolitan TAFE does not guarantee a licensed outcome as CASA is the Australian licensing and regulatory authority.

    Delivery location, important dates and study options

    All year round

    Jandakot - Apprenticeship Fixed Wing Piston Pressur

    Overview

    Fees and charges

    Units

    Overview
    Duration 4 year
    When All year round
    Where Jandakot
    How Apprenticeship
    Part Time
    Apply now
    Ready to apply for this course? Check out the apply and enrol page for more information.

    All year round

    Jandakot - Apprenticeship-Heli Piston Turbine

    Overview

    Fees and charges

    Units

    Overview
    Duration 18 months
    When All year round
    Where Jandakot
    How Apprenticeship
    Part Time
    Apply now
    Ready to apply for this course? Check out the apply and enrol page for more information.
    Jandakot - Apprenticeship-Heli Piston

    Overview

    Fees and charges

    Units

    Overview
    Duration 4 year
    When All year round
    Where Jandakot
    How Apprenticeship
    Part Time
    Apply now
    Ready to apply for this course? Check out the apply and enrol page for more information.
    Jandakot - Apprenticeship-Heli Turbine

    Overview

    Fees and charges

    Units

    Overview
    Duration 18 months
    When All year round
    Where Jandakot
    How Apprenticeship
    Part Time
    Apply now
    Ready to apply for this course? Check out the apply and enrol page for more information.
    Jandakot - Apprenticeship Fixed Wing Piston Pressur

    Overview

    Fees and charges

    Units

    Overview
    Duration 4 year
    When All year round
    Where Jandakot
    How Apprenticeship
    Part Time
    Apply now
    Ready to apply for this course? Check out the apply and enrol page for more information.
    Jandakot - Apprenticeship Fixed Wing Piston Pressur

    Overview

    Fees and charges

    Units

    Overview
    Duration 4 year
    When All year round
    Where Jandakot
    How Apprenticeship
    Part Time
    Apply now
    Ready to apply for this course? Check out the apply and enrol page for more information.
    Jandakot - Apprenticeship Fixed Wing Piston Unpress

    Overview

    Fees and charges

    Units

    Overview
    Duration 4 year
    When All year round
    Where Jandakot
    How Apprenticeship
    Part Time
    Apply now
    Ready to apply for this course? Check out the apply and enrol page for more information.
    Jandakot - Apprenticeship Fixed Wing Turbine

    Overview

    Fees and charges

    Units

    Overview
    Duration 18 months
    When All year round
    Where Jandakot
    How Apprenticeship
    Part Time
    Apply now
    Ready to apply for this course? Check out the apply and enrol page for more information.
    Jandakot - Apprenticeship Fixed Wing Structures

    Overview

    Fees and charges

    Units

    Overview
    Duration 18 months
    When All year round
    Where Jandakot
    How Apprenticeship
    Part Time
    Apply now
    Ready to apply for this course? Check out the apply and enrol page for more information.
    Jandakot - Apprenticeship Fixed Wing Turbine-T/fan

    Overview

    Fees and charges

    Units

    Overview
    Duration 4 year
    When All year round
    Where Jandakot
    How Apprenticeship
    Part Time
    Apply now
    Ready to apply for this course? Check out the apply and enrol page for more information.

    Course enquiry

    Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

    For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

    Follow Vessel Security Procedures Skill Set

    State ID: GAA43

    Under the Manila Amendments to the STCW Convention, it is now mandatory for all seafarers to possess knowledge related to security awareness, before engaging on board a vessel, and to undergo security related training. This course meets the requirements of Regulation V1/6 of the STCW Convention as amended.

    Delivery location, important dates and study options

    Course enquiry

    Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

    For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

    Advanced Diving Skill Set

    State ID: GAB13

    This course is available to those who already have their Open Water Diver qualification, and are looking to increase their skills and confidence in the water.

    There are no theory days nor pool days in this course.

    Simply ocean diving - most of which will be made from our dive vessel, the Maritime Image.

    Within the dives that you will complete as part of this course, you will also gain experience in deep diving, and night diving.

    Delivery location, important dates and study options

    All year round

    Fremantle - Part Time-Classroom-All year

    Overview

    Units

    Overview
    Where Fremantle
    How Part Time
    Enquire now
    Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

    Course enquiry

    Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

    For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

    Certificate IV in Maritime Operations (Master up to 35 metres Near Coastal)

    National ID: MAR40618 | State ID: BDT9

    This certificate will allow you to work as:

    • Master on commercial vessels up to 35 metres long within the exclusive economic zone (EEZ).
    • Master on vessels up to 80 metres long in inshore waters.
    • Chief mate or deck watchkeeper on vessels up to 80 metres long within the EEZ.

     

      2020 Dates:

      The course runs for 8 weeks, 5 days a week starting on the following dates.

      Semester 1
      3 February

      Semester 2
      20 July

      Entrance Requirements

      Job opportunities

      Entrance Requirements

         
      Candidates are expected to hold an AMSA Elements of Shipboard Safety certificate including HLTAID003 Provide First Aid prior to entry and a Certificate III in Maritime Operations (Master less than 24 meters near coastal) qualification prior to entry into this qualification.

      In addition to successful completion of Certificate IV in Maritime Operations (Master up to 35 meters Near Coastal), the Australian Maritime Safety Authority (AMSA) requires students to successfully complete each of the following to be issued with a new certificate of competency:

      • Be at least 16 years old
      • Meet medical and eyesight test requirements
      • Completed AMSA approved task book or have qualifying sea service
      • Long Range Operator certificate of Proficiency or equivalent
      • Pass a final assessment at an AMSA office
      Job opportunities

       

      • This level of qualification is currently cited as meeting some of the requirements for certification as a Master up to 35 metres Near Coastal as defined by the National Standard for Commercial Vessels (NSCV) Part D.

       

       

      For information about jobs and pathways, please see
      http://joboutlook.gov.au/

       

      Further study opportunities:

       

      • MAR50415 Diploma of Maritime Operations (Master up to 500 GT), State ID AWO3

       

      Delivery location, important dates and study options

      Semester 1

      Fremantle - Full Time-Classroom

      Overview

      Fees and charges

      Units

      Overview
      When Semester 1
      Where Fremantle
      How Full Time
      Get started
      This course is available to those already working in industry. Use the link below to have  further information sent to you.

      Semester 2

      Fremantle - Full Time-Classroom

      Overview

      Fees and charges

      Units

      Overview
      When Semester 2
      Where Fremantle
      How Full Time
      Get started
      This course is available to those already working in industry. Use the link below to have  further information sent to you.

      Course enquiry

      Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

      For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.