, , , ,
Home | Short courses | Construction, Electrical and Plumbing

Construction, Electrical and Plumbing

Refine course results
National ID State ID Title Qualification level Study mode Campus
S0049P S0049P Basic Combustion, Flueing and Exhaust Principles Short Course Part Time
Rockingham
Q000012

The Gas Legislation and Safety course comprises three modules (Gas Standards Legislation, Gas Safety and  Basic Combustion, Fluing and Exhaust Principles), and two parts - Learning and Test

Learning is available online or on a face to face basis (whichever is most suitable for the individuals’ needs) and this ends with the test that is mandated by Energy Safety, the State regulator.

Learning
The online course is available to anyone who enrols and is self-paced, auto-marked and successful completion produces a letter for the student to bring to us, which enables them to take the test. The face to face course is available to anyone who enrols and is run from Rockingham campus on any Tuesday during teaching weeks only. Successful completion of the course enables the student to take the test.

Test 
The test can only be conducted on a face to face basis (Not available online) and is available from Rockingham campus on any Wednesday during teaching weeks only. Successful completion of the test enables students to apply for their restricted Class G permit through Energy Safety.

2019 Dates

  • Wednesday September 25 - Thursday September 26, 2019
  • Wednesday December 4 - Thursday December 5, 2019
     
GAA78 GAA78 Construction Apprenticeship Ready Skill Set Skill set Part Time
Thornlie
Q000003

This five-day short course will provide students with a taste of the Construction industry, as well as an opportunity to obtain a White Card.

Students will complete five-days of workshop training where they will obtain a White Card whilst learning about basic hand skills, how to mix mortar, how to handle a trowel and lay bricks and how to identify and use bricklaying tools and equipment. 

Successful completion of the course may lead to further apprenticeship studies in brick/blocklaying. 

Entrance requirements 
To be eligible for a Western Australian apprenticeship you must 
be either 
•an Australian citizen or have Australian citizenship
•be a permanent resident
•be the holder of a passport with Visa subclass 309, 310, 820,
826, 851; or
•be a dependant on a 457 Visa.
You MUST provide proof of your status at your first class, by showing either your Australian passport, Australian Citizenship Certificate, Australian Birth Certificate, Overseas Passport with Permanent Residency Visa or Visa subclass, Medicare Card, Commonwealth Health Care Card or Commonwealth Seniors Health Card.

Resource requirements Steel capped boots are mandatory for this course. We also suggest wearing work attire such as shorts or pants with a t-shirt. 
 

UEESS00052 AB672 Data Communications - Install and Modify Performance Data Communication Structured Cabling Skill set Full Time
Thornlie
Data, install, modify, communications, telcom, cabling, performance, fibre, optic, optical, telephone, cable, balga, Q000000, Q000015, UEENEEF105A, wc461, TAFE13

To enrol into this course you must already have an Open Cabling registration.
UEENEEF105A - Install and modify optical fibre performance data communication cabling.

On completion of this unit of competency the student will be able to register with any of the ACMA registrar for endorsement on fibre cabling.

The student will cover the installation and modification of high performance data communication optical fibre cabling in building and premises and intended for connection of a telecommunications network.

This course encompasses working safely and to standards, installing multiple data lines and backbones using optical fibre cabling, terminating at distributors, splices and on socket outlets, testing and compliance checks and completing cabling documentation.

The cost of the course will include the consumables and the student will be required to bring their own PPE (safety glasses and safety footwear). The students can bring their own hand tools but the college will provide otherwise.
 

GAA87 GAA87 Design and Size Consumer Gas Installations Skill Set Skill set Part Time
Rockingham
gas, design, consumer, plumbing, legislation, license, western australia

The designing and sizing of consumer gas installations is a compulsory requirement within the Trade Certificate (Certificate IV in Plumbing) for a plumber in WA.

This course covers the skills and knowledge needed to design, document and draw consumer gas installations under the scope of operations enabled by a G class permit holder in Western Australia.

See entrance requirements for important information about studying this course.

S0010P S0010P Electrical Contractors Nominees Licence/Electrical Contractors Licence Course Short Course Part Time
Thornlie
Electrical, contractor, contractors, pwa0022, ecl, S0010P

Full Electrical Contractors Course

The full electrical contractors course includes both nominee and business components.

Course content

This Electrical Licensing Board-approved course provides theoretical and practical training and is designed to enhance participants’ existing skill sets. The program will not only build upon your current electrical trade studies, it will also improve and refresh your knowledge of:

• statutory requirements (Electrical Contractors Nominees/In-house Licence) 
• legislation and process (Electrical Contractors Nominees/In-house Licence) 
• inspection and testing of electrical installation work (Electrical Contractors Nominees/In-house Licence) 
• business task management and monitoring business operations (Electrical Contractors Licence)

Electrical Contractors Licence course consists of four mandatory units.

  • S0060P  EA103A Operation (Electrical) Legislative Requirements
  • S0056P  WAE100 Electrical Requirements
  • S0058P  EA102 Establishing a Contracting Business
  • S0059P  EA103B General Legislative Requirements

Electrical Contractors Nominees / In-house Licence course consists of two mandatory units.

  • S0060P  EA103A Operation (Electrical) Legislative Requirements
  • S0056P  WAE100 Electrical Requirements

Electrical Contractors Business Licence course consists of two mandatory units.

  • S0058P  EA102 Establishing a Contracting Business
  • S0059P  EA103B General Legislative Requirements

 

 

Next dates for delivery of in-house license units:

17 February
16 March
4 May
22 June

Fees for the course are:

Nominees – $880 ($440.00 per unit)
Business – $995 ($497.50 per unit)

S0056P S0056P Electrical Requirements Short Course Part Time
Thornlie
Electrical, contractor, contractors, Q000000, Q000009, ecl, S0010P

Full Electrical Contractors Course

To be eligible you must hold a current electrical workers licence, restricted licence is not acceptable.

The full electrical contractors course includes both nominee and business components.

  • Nominee component includes five days face to face
  • Business component includes online learning plus one day of assessment maximum six months to complete

Business and Nominee contractors courses can be completed separately.

To make a booking or any general enquiries please use the web form on this page.

Course content

This Electrical Licensing Board-approved course provides theoretical and practical training and is designed to enhance participants’ existing skill sets. The program will not only build upon your current electrical trade studies, it will also improve and refresh your knowledge of:

• statutory requirements (Electrical Contractors Nominees/In-house Licence) 
• legislation and process (Electrical Contractors Nominees/In-house Licence) 
• inspection and testing of electrical installation work (Electrical Contractors Nominees/In-house Licence) 
• business task management and monitoring business operations (Electrical Contractors Licence)*

* Please note: If you are not working within an electrical contracting company, a person other than an electrical contractor may hold the business aspect of the licence. In this case, the electrical work will only be completed, under that aspect of the licence, by an electrician employed by that company and nominated by that same employer as the Nominees/In-house Licence holder.

Electrical Contractors Licence course consists of four mandatory units.

  • S0060P  EA103A Operation (Electrical) Legislative Requirements
  • S0056P  WAE100 Electrical Requirements
  • S0058P  EA102 Establishing a Contracting Business
  • S0059P  EA103B General Legislative Requirements

Electrical Contractors Nominees / In-house Licence course consists of two mandatory units.

  • S0060P  EA103A - Operation (Electrical) Legislative Requirements
  • S0056P  WAE100 - Electrical Requirements

Electrical Contractors Business Licence course consists of two mandatory units.

  • S0058P  EA102 - Establishing a Contracting Business
  • S0059P  EA103B - General Legislative Requirements

Course materials required

Students are required to obtain the following materials prior to course commencement.

From South Metropolitan TAFE:
AS/NZS 3000 and all amendments
AS/NZS 3008.1.1
AS/NZS 3760
AS/NZS 3017

From State Law Publisher
ph 6552 6000
8.30am to 4.30pm
Electrical (Licencing) Regulations 1991 and all amendments
Electricity Regulations 1947
WA Electrical Requirements
. This can be downloaded directly from http://www.commerce.wa.gov.au/publications/wa-electrical-requirements-waer or call Energy Safety on 6251 2000, Level 1, 303 Sevenoaks Street Cannington WA 6107

Standards Australia are subject to change without notice and all students should check for the latest version and amendments at purchase.

S0056P 2019 Dates

  • Monday August 5 - Friday August 9, 2019
  • Monday September 16 - Friday September 20, 2019
  • Monday October 21 - Friday October 25, 2019
  • Monday November 18 - Friday November 22, 2019
S0057P S0057P Electrical Trade Revision Short Course Part Time
Self Paced
Rockingham
Thornlie
electrical, revision, electrician, Q000000, Q000009, ZZ000000,

The Electrical Trade Revision course is for 4th year apprentices. The aim of the course is to provide apprentices the opportunity to review and revise the electrical principles and essential performance criteria they have covered in the past 4 years.

The following subjects are covered:

  • Technical Standards
  • Installation testing and isolation procedures
  • Maximum demand
  • Cable selection
  • Circuit protection
  • Appliance testing
  • Electrical theory

 

S0058P S0058P Establishing a Contracting Business Short Course Part Time
Self Paced
Thornlie
Electrical, contractor, contractors, Q000000, Q000009, ecl, S0010P

Full Electrical Contractors Course

To be eligible you must hold a current electrical workers licence, restricted licence is not acceptable.

The full electrical contractors course includes both nominee and business components.

  • Nominee component includes five days face to face
  • Business component includes online learning plus one day of assessment maximum six months to complete

Business and Nominee contractors courses can be completed separately.

To make a booking or any general enquiries please use the web form on this page.

Course content

This Electrical Licensing Board-approved course provides theoretical and practical training and is designed to enhance participants’ existing skill sets. The program will not only build upon your current electrical trade studies, it will also improve and refresh your knowledge of:

• statutory requirements (Electrical Contractors Nominees/In-house Licence) 
• legislation and process (Electrical Contractors Nominees/In-house Licence) 
• inspection and testing of electrical installation work (Electrical Contractors Nominees/In-house Licence) 
• business task management and monitoring business operations (Electrical Contractors Licence)*

* Please note: If you are not working within an electrical contracting company, a person other than an electrical contractor may hold the business aspect of the licence. In this case, the electrical work will only be completed, under that aspect of the licence, by an electrician employed by that company and nominated by that same employer as the Nominees/In-house Licence holder.

Electrical Contractors Licence course consists of four mandatory units.

  • S0060P  EA103A Operation (Electrical) Legislative Requirements
  • S0056P  WAE100 Electrical Requirements
  • S0058P  EA102 Establishing a Contracting Business
  • S0059P  EA103B General Legislative Requirements

Electrical Contractors Nominees / In-house Licence course consists of two mandatory units.

  • S0060P  EA103A - Operation (Electrical) Legislative Requirements
  • S0056P  WAE100 - Electrical Requirements

Electrical Contractors Business Licence course consists of two mandatory units.

  • S0058P  EA102 - Establishing a Contracting Business
  • S0059P  EA103B - General Legislative Requirements

Course materials required

Students are required to obtain the following materials prior to course commencement.

From South Metropolitan TAFE:
AS/NZS 3000 and all amendments
AS/NZS 3008.1.1
AS/NZS 3760
AS/NZS 3017

From State Law Publisher
ph 6552 6000
8.30am to 4.30pm
Electrical (Licencing) Regulations 1991 and all amendments
Electricity Regulations 1947
WA Electrical Requirements
. This can be downloaded directly from http://www.commerce.wa.gov.au/publications/wa-electrical-requirements-waer or call Energy Safety on 6251 2000, Level 1, 303 Sevenoaks Street Cannington WA 6107

Standards Australia are subject to change without notice and all students should check for the latest version and amendments at purchase.

S0058P 2019 Dates

Thursday August 1, 2019 - Friday January 31, 2020

S0048P S0048P Gas Safety Short Course Part Time
Rockingham
Q000012

The Gas Legislation and Safety course comprises three modules (Gas Standards Legislation, Gas Safety and  Basic Combustion, Fluing and Exhaust Principles), and two parts - Learning and Test

Learning is available online or on a face to face basis (whichever is most suitable for the individuals’ needs) and this ends with the test that is mandated by Energy Safety, the State regulator.

Learning
The online course is available to anyone who enrols and is self-paced, auto-marked and successful completion produces a letter for the student to bring to us, which enables them to take the test. The face to face course is available to anyone who enrols and is run from Rockingham campus on any Tuesday during teaching weeks only. Successful completion of the course enables the student to take the test.

Test 
The test can only be conducted on a face to face basis (Not available online) and is available from Rockingham campus on any Wednesday during teaching weeks only. Successful completion of the test enables students to apply for their restricted Class G permit through Energy Safety.
 

2019 Dates

  • Wednesday September 25 - Thursday September 26, 2019
  • Wednesday December 4 - Thursday December 5, 2019
S0047P S0047P Gas Standards Legislation Short Course Part Time
Rockingham

The Gas Legislation and Safety course comprises three modules (Gas Standards Legislation, Gas Safety and  Basic Combustion, Fluing and Exhaust Principles), and two parts - Learning and Test

Learning is available online or on a face to face basis (whichever is most suitable for the individuals’ needs) and this ends with the test that is mandated by Energy Safety, the State regulator.

Learning
The online course is available to anyone who enrols and is self-paced, auto-marked and successful completion produces a letter for the student to bring to us, which enables them to take the test. The face to face course is available to anyone who enrols and is run from Rockingham campus on any Tuesday during teaching weeks only. Successful completion of the course enables the student to take the test.

Test 
The test can only be conducted on a face to face basis (Not available online) and is available from Rockingham campus on any Wednesday during teaching weeks only. Successful completion of the test enables students to apply for their restricted Class G permit through Energy Safety.

2019 Dates

  • Enrolments can occur through the year.
  • Students must attend campus for final test.
  • Participants should allow 1.5 days but completion is usually achieved in 1 day
  • Courses are generally held on Tuesdays after sufficient enrolments occur
  • Dates are subject to flexible scheduling and individual circumstances
S0059P S0059P General Legislative Requirements Short Course Part Time
Self Paced
Thornlie
Electrical, contractor, contractors, Q000000, Q000009, ecl, S0010P

Full Electrical Contractors Course

To be eligible you must hold a current electrical workers licence, restricted licence is not acceptable.

The full electrical contractors course includes both nominee and business components.

  • Nominee component includes five days face to face
  • Business component includes online learning plus one day of assessment maximum six months to complete

Business and Nominee contractors courses can be completed separately.

To make a booking or any general enquiries please use the web form on this page.

Course content

This Electrical Licensing Board-approved course provides theoretical and practical training and is designed to enhance participants’ existing skill sets. The program will not only build upon your current electrical trade studies, it will also improve and refresh your knowledge of:

• statutory requirements (Electrical Contractors Nominees/In-house Licence) 
• legislation and process (Electrical Contractors Nominees/In-house Licence) 
• inspection and testing of electrical installation work (Electrical Contractors Nominees/In-house Licence) 
• business task management and monitoring business operations (Electrical Contractors Licence)*

* Please note: If you are not working within an electrical contracting company, a person other than an electrical contractor may hold the business aspect of the licence. In this case, the electrical work will only be completed, under that aspect of the licence, by an electrician employed by that company and nominated by that same employer as the Nominees/In-house Licence holder.

Electrical Contractors Licence course consists of four mandatory units.

  • S0060P  EA103A Operation (Electrical) Legislative Requirements
  • S0056P  WAE100 Electrical Requirements
  • S0058P  EA102 Establishing a Contracting Business
  • S0059P  EA103B General Legislative Requirements

Electrical Contractors Nominees / In-house Licence course consists of two mandatory units.

  • S0060P  EA103A - Operation (Electrical) Legislative Requirements
  • S0056P  WAE100 - Electrical Requirements

Electrical Contractors Business Licence course consists of two mandatory units.

  • S0058P  EA102 - Establishing a Contracting Business
  • S0059P  EA103B - General Legislative Requirements

Course materials required

Students are required to obtain the following materials prior to course commencement.

From South Metropolitan TAFE:
AS/NZS 3000 and all amendments
AS/NZS 3008.1.1
AS/NZS 3760
AS/NZS 3017

From State Law Publisher
ph 6552 6000
8.30am to 4.30pm
Electrical (Licencing) Regulations 1991 and all amendments
Electricity Regulations 1947
WA Electrical Requirements
. This can be downloaded directly from http://www.commerce.wa.gov.au/publications/wa-electrical-requirements-waer or call Energy Safety on 6251 2000, Level 1, 303 Sevenoaks Street Cannington WA 6107

Standards Australia are subject to change without notice and all students should check for the latest version and amendments at purchase.

S0059P 2020 Dates

  • Future dates will be listed when they become available
GAA36 GAA36 Grid Connect Design and Install Clean Energy Council Skill Set Skill set Part Time
Thornlie
Grid, Connect, PV, Battery, Storage, Photovoltaic, installations, installer, solar, SMT0154, electrical, electrician, Q000000, Q000009,  ZZ000000, GAA36,

The course runs for 5 consecutive days and contains theoretical and practical components and assessments. Over the five days students will cover the required Australian Standards and Clean Energy Council Guidelines for accredited Installers and Designers.

The course consists of three units:

  • UEENEEK125A Solve basic problems in photovoltaic energy apparatus and systems
  • UEENEEK135A Design grid connected photovoltaic power supply systems
  • UEENEEK148A Install, configure and commission LV grid connected photovoltaic power systems

On successful completion of units K125A and K135A a student may register as a Clean Energy Council accredited Grid Connect Designer.

On successful completion of K125 and K148 a student may register as a Clean Energy Council accredited Installer.

A student who completes all three units successfully may apply for accreditation as an accredited CEC Installer and Designer.

Prospective students must have a WA Electrical licence to complete all three units. If you have an electrical engineering background and no EW licence you will be only eligible to complete the two design units.

2019 Dates

  • Monday July 29, 2019
  • Monday October 21, 2019
  • Monday November 25, 2019

 

GAA97 GAA97 Introduction to Furniture Making Skill Set Skill set Part Time
Thornlie
Q000002, Furniture, making, gaa97,

The introduction to Furniture Making Skill Set is suitable for participants wishing to gain basic furniture and cabinet making skills. Participants will be taught the set up and safe use of a wide variety of furniture/cabinet making hand tools and power tools to construct a Spice Rack Cabinet, complete with two doors and an adjustable shelf. Participants will also learn how to prepare all surfaces of this project in readiness for applying a finish. Students who successfully complete this course could continue their studies with a pre-apprenticeship and/or apprenticeship in the furniture and cabinet making field Units: MSMWHS200 Work safely (AWC15) MSFFM2001 Use furniture making sector hand and power tools (WI410) MSFFF2004 Prepare surfaces for finishing (WI316)

2019 Dates

  • Friday July 26 - Friday September 27, 2019
  • Friday October 11 - Friday December 13, 2019
S0060P S0060P Operation (Electrical) Legislative Requirements Short Course Part Time
Thornlie
Electrical, contractor, contractors, Q000000, Q000009, ecl, S0010P

Full Electrical Contractors Course

To be eligible you must hold a current electrical workers licence, restricted licence is not acceptable.

The full electrical contractors course includes both nominee and business components.

  • Nominee component includes five days face to face
  • Business component includes online learning plus one day of assessment maximum six months to complete

Business and Nominee contractors courses can be completed separately.

To make a booking or any general enquiries please use the web form on this page.

Course content

This Electrical Licensing Board-approved course provides theoretical and practical training and is designed to enhance participants’ existing skill sets. The program will not only build upon your current electrical trade studies, it will also improve and refresh your knowledge of:

• statutory requirements (Electrical Contractors Nominees/In-house Licence) 
• legislation and process (Electrical Contractors Nominees/In-house Licence) 
• inspection and testing of electrical installation work (Electrical Contractors Nominees/In-house Licence) 
• business task management and monitoring business operations (Electrical Contractors Licence)*

* Please note: If you are not working within an electrical contracting company, a person other than an electrical contractor may hold the business aspect of the licence. In this case, the electrical work will only be completed, under that aspect of the licence, by an electrician employed by that company and nominated by that same employer as the Nominees/In-house Licence holder.

Electrical Contractors Licence course consists of four mandatory units.

  • S0060P  EA103A Operation (Electrical) Legislative Requirements
  • S0056P  WAE100 Electrical Requirements
  • S0058P  EA102 Establishing a Contracting Business
  • S0059P  EA103B General Legislative Requirements

Electrical Contractors Nominees / In-house Licence course consists of two mandatory units.

  • S0060P  EA103A - Operation (Electrical) Legislative Requirements
  • S0056P  WAE100 - Electrical Requirements

Electrical Contractors Business Licence course consists of two mandatory units.

  • S0058P  EA102 - Establishing a Contracting Business
  • S0059P  EA103B - General Legislative Requirements

Course materials required

Students are required to obtain the following materials prior to course commencement.

From South Metropolitan TAFE:
AS/NZS 3000 and all amendments
AS/NZS 3008.1.1
AS/NZS 3760
AS/NZS 3017

From State Law Publisher
ph 6552 6000
8.30am to 4.30pm
Electrical (Licencing) Regulations 1991 and all amendments
Electricity Regulations 1947
WA Electrical Requirements
. This can be downloaded directly from http://www.commerce.wa.gov.au/publications/wa-electrical-requirements-waer or call Energy Safety on 6251 2000, Level 1, 303 Sevenoaks Street Cannington WA 6107

Standards Australia are subject to change without notice and all students should check for the latest version and amendments at purchase.

S0060P 2019 Dates

  • Monday August 5 - Friday August 9, 2019
  • Monday September 16 - Friday September 20, 2019
  • Monday October 21 - Friday October 25, 2019
  • Monday November 18 - Friday November 22, 2019
S0038P S0038P PVC Pipe Handling and Installation Short Course Part Time
Rockingham
pvc, pipe, laying, water corp, water, corporation, smt0056, s0038p,

This course is a Water Corporation of WA accredited program, for operatives in the civil and construction areas working on land development projects where PVC pipe laying is required.

The accredited program provides essential knowledge and practical skills for PVC Pipe layers. The course provides updated theory provided by the Water Corporation to address new requirements. Assessment methods include theory and practical assessing.

Candidates must be over 18 years of age.

 

GAA58 GAA58 Painters Registration - Business and Estimating Skill Set Skill set Part Time
Self Paced
Thornlie
Q000000, Q000006, painter, painters, painting, decorating, registration, building, painter's, painters', yw10, yw1o, TAFE13, Construction, Signcraft, license, licence, ZZ000000 smt0147, GAA58

There are two units of the Course in Painters Registration included in this short course.

AUL08 Establish legal and risk management requirements of small business (BSBSMB401)

This unit describes the skills and knowledge required to identify and comply with all regulations affecting the business. It applies to individuals operating a small business who use analytical skills to interpret legislation and regulations and develop procedures to manage compliance.

W9241 Identify and produce estimated costs for building and construction projects (CPCCBC4004A)

This unit of competency specifies the outcomes required to establish the estimated costs associated with the acquisition of materials and labour on building and construction sites, together with the application of relevant overhead costs and margins. Knowledge of physical resource and supplier identification, assessment of the availability of and requirements for skilled labour and application of appropriate codes, regulations and approvals gaining processes is essential.

Participants must have previous experience in the painting industry and be seeking licensing with the Building Commission.

Completion of all four units from the Course in Painters Registration will satisfy requirements for licensing.

For Business and Estimating

  • BSBSMB401 AUL08 Establish Legal and Risk Management Requirements of Small Business (CBT)
  • CPCCBC4004A W9241 Identify and Produce Estimated Costs for Building and Construction Projects (CBT)

For Prepare Surfaces and Wallpapering

  • CPCCPD3021A D7385 Prepare Surfaces for Painting (CBT)
  • 82985 PRB Colour and Wallpapering (CBT)

The Course in Painters Registration will provide you with the skills and knowledge to work as a contractor in the painting and decorating industry. You will learn about surface preparation, coating systems, colour theory and wallpapering techniques. You will also learn how to estimate costs associated with the acquisition of materials and labour on building and construction sites and understand the practice of running a painting and decorating business.

2019 Dates

  • Online study
  • Intensive (5 days full-time)
  • Evenings (2 nights a week for 16 weeks)
  • Online has continuous enrolments
  • For the latest dates for Intensive or Evening, contact SMTAFE on 1800 001 001
GAA61 GAA61 Painters Registration - Prepare Surface for Painting and Colour and Wallpapering Skill Set Skill set Part Time
Self Paced
Thornlie
painter, painters, painting, decorating, registration, building, painter's, painters', yw10, yw1o, Construction, Signcraft, license, licence, smt0144, GAA61

This short course covers two units from the Course in Painters Registration.

D7385 Prepare surfaces for painting (CPCCPD3021A)

This unit of competency specifies the outcomes required to restore, repair and prepare different material surfaces for the application of paint.The unit includes planning and preparation for the work, preparation of new or uncoated surfaces, preparation of previously coated surfaces, preparation of previously wallpapered surfaces for painting and completion of clean-up activities.

82985 PRB colour and wallpapering (82985)

2019 Dates

Ongoing enrolments for online study

GAA40 GAA40 Plumbing Contracting Licensing (Business) Skill Set Skill set Part Time
Bentley
Rockingham
plumbing, license, J497short, CPC40912, plumbers, contracting, contractor, contractors, licensing, smt0141, j497, Gaa40, GAA41,

The business units in this plumbing contracting skill set are considered self paced, as the first five days are mandatory campus attendance, then the study will be mainly online for the bulk of the course work, and then finalised by three days attendance at campus in this 12 week course.

Books that are supplied to you as part of the course fee:

• ISBN: (9781921734045) BSBSMB401A Textbook Establish Business Legal Requirements
• ISBN: (2770000021524) BCPCM4002A Estimate & Cost Plumbing Theory Notes
• IBSN: (2770000021517) BCPCM4001A Carry Out Risk Control Processes Theory Notes
   

Students must supply the following regulations/standards at their own cost:

• Health Regulations Standards Act ISBN: (RKH028) Treatment of Sewerage, Disposal of Effluent & Liquid Wastes
• Water Regulations Standards ISBN: (RKP 097) Plumbers Licensing and Plumbing Standards Regulations 2000
• AS/NZS 3500 Plumbing Code ISBN: 2770000019835 2015 Edition

 

2020 Dates:

You may enrol anytime for this course. There are mandatory attendance dates at campus below with the rest of the study to be done at home.

  • Monday 9 to 13 December, 2019 and return Wednesday 19 to Friday 21 February, 2020
  • Monday 30 March to 3 April, 2020 and return Wednesday 13 to Friday 15 May, 2020
  • Monday 22 to 26 June, 2020 and return Wednesday 5 to Friday 7 August, 2020
  • Monday 14 to 18 September, 2020 and return Wednesday 21 to Friday 23 October
  • Monday 30 November to 4 December, return dates to be confirmed

Units and their costs:

  • Work based risk control processes, $170.00
  • Establish legal and risk management requirements of small business, $171.00
  • Estimate and cost work, $157.00
GAA41 GAA41 Plumbing Contracting Licensing (Specialist) Skill Set Skill set Part Time
Bentley
Rockingham

The following theory components of the course require you to complete a workbook for each. You will be required to present these completed workbooks on the commencement of each theory class.
• Drainage
• Sanitary
• Backflow
• Water Supply

Books that are supplied to you as part of the course fee:

Drainage Units:
• ISBN: (9781742058115) CPCPDR4013A BC1909 Domestic Treatment plant Disposal Systems
• ISBN: (9781742058139) CPCPDR4011A BC1911 Sanitary Drainage systems.

Backflow Units:
• ISBN: (9781742058108) CPCPWT4012A BC1908

Commission & Maintain Backflow Prevention Devices Sanitary Units:
• ISBN: (9781742058054) CPCPSN4011A BC1901

Design and size sanitary plumbing system Water Units:
• ISBN: (9781742056951) CPCPWT4011A BC1907 Design and size Heated and cold water Services and system
• ISBN: (9781742058122) CPCPWT4003A BC1910 Commission and maintain Heated Water Temperature

Students must supply the following regulations/standards at their own cost:

• Health Regulations Standards Act ISBN: (RKH028) Treatment of Sewerage, Disposal of Effluent & Liquid Wastes
• Water Regulations Standards ISBN: (RKP 097) Plumbers Licensing and Plumbing Standards Regulations 2000
• AS/NZS 3500 Plumbing Code ISBN: 2770000019835 2015 Edition

2019 Dates

All courses are run on an "as needed basis" and are subject to sufficient numbers of participants

Backflow
  • Monday 3 to Wednesday 5 February, 2020
    Cost $160.50
Water Supply
  • Thursday 6 to Thursday 13 February, 2020
    Cost $366.50
Drainage
  • Monday 24 to Monday 9 March, 2020
    Cost $571.00
Sanitary
  • Monday 16 to Monday 23 March, 2020
    Cost $321.00

Future dates in terms 1, 2 and 3 in 2020 can be supplied by using the enquiry form at the bottom of this page.

S0096P S0096P Restricted Plumbers Licence Short Course Part Time
Rockingham

Upon successful completion of this course, the participant will be able to obtain a restricted licence from the Plumbing Licensing Board.

A Restricted Plumbing Licence qualifies the holder to remove and replace water heaters and disconnecting, removing, installing and reconnecting compression unions, temperature/pressure relief valves and expansion control valves.

Scope of work authorised under a restricted plumbing permit:

There are two criteria for determining the type of plumbing work permitted to be carried out by the holder of a restricted plumbing permit.

Criteria 1

The plumbing work to be carried out must only be in the course of:

a. removing a water heater; or
b. removing and reinstalling a water heater; or
c. replacing a water heater.

Criteria 2

The work to be carried out is limited to disconnecting, removing, installing and reconnecting:

a. a compression union;
b. a temperature/pressure relief valve; or
c. an expansion control valve.

Only licensed electrical workers and licensed gasfitters are eligible to obtain a restricted plumbing permit.

GAA37 GAA37 Service Type A Gas Appliances Skill Set Skill set Part Time
Rockingham
SERVICE, TYPE A, GAS, GASFITTING, SERVICING, ENERGY, SAFETY, PERMIT, wf908, j497, CPC40912, cpcpgs4022A, gaa37,

Applicants must hold a G Class gas permit from Energy Safety W.A.

This course will train and assess students in the skills and knowledge required to competently service Type A gas appliances.

Students completing this course can apply to Energy Safety W.A. to have 'Servicing' endorsed on their G Class permit.

Students will need to conduct self-directed computer based training using Blackboard.

Course Outline:

  • basic electrical theory 
  • characteristics of electromotive force (EMF) 
  • characteristics of fuses
  • circuit breakers
  • residual current devices and earthing systems 
  • combustion characteristics and effects 
  • conduction 
  • current flow 
  • ignition systems 
  • insulation 
  • isolation procedures 
  • Ohm's law 
  • burners and burner adjustment 
  • characteristics of conversion from one gas type to another 
  • classification of appliances and identification of related components 
  • electrical safety, including isolation procedures and requisite precautions 
  • gas appliance regulators 
  • gas appliance thermostats 
  • gas safety, including:
  • combustion characteristics and effects 
  • isolation procedures 
  • job safety analysis (JSA) and safe work method statements (SWMS) 
  • operation of flame failure systems used in Type A gas appliances

2019 Dates

Monday 18 November to Friday 29 November, 2019

S0062P S0062P Testing and Tagging - Using a Portable Appliance Tester Short Course Part Time
Self Paced
Rockingham
Q000009

This course will provide you with the skills and knowledge required to meet AS/NZS 3760 the Australian standard on testing and tagging for Test and Tag.

The course delivers the required knowledge and skills necessary to:

  • Work safely using a portable appliance tester 
  • identify faults 
  • arrange for repair of faulty equipment
  • apply tagging and
  • complete test documentation.
S0063P S0063P Testing and Tagging of Portable RCD's Short Course Part Time
Self Paced
Rockingham
Q000009

On completion of this course you will have the skills and knowledge to test and tag RCD's in accordance with AS/NZS 3760:2010.

Work Health and Safety Regulations state all businesses must have a RCD protecting all hostile circuits that must be tested to ensure it will respond in a timely manner during fault situations.

 

 

GAA98 GAA98 Work Ready Painting and Decorating Skill Set Skill set Part Time
Thornlie
Q000000, Q000006, Painting, Finishing, Decorating, Painter, building, construction, art, build, Signcraft, paint, creative, interior, design, decorator, gaa98,

This five-day short course will provide students with a taste of the Painting industry, as well as an opportunity to obtain a White Card.

Due to the nature of the course activities, all participants of this course will need to wear work attire suitable for workshop environment.

2019 Dates

  • There are presently no dates available for semester two
  • Last run Monday June 17 - Friday June 21, 2019

Sorry, your search has returned zero results. Try removing some of the filters to see if you can find some courses.

Page last updated September 26, 2019