COVID-19 updates
Home | Qualification Level | Short Course

Short Course

Brow Lamination

State ID: S0141P

Advance your employability skills and build your treatment menu with our Brow Lamination short course.

Brow lamination is an on trend technique for redefining eyebrows through straightening and lifting  by a specialised chemical process. This treatment is fantastic for those clients who have unruly/wiry hair or clients who need the appearance of more volume to their brow.  

Job opportunities

Job opportunities

This workshop will enable you to safely perform brow lamination in the workplace and further broaden your lash and brow skills.

 

For information about jobs and pathways, please see http://joboutlook.gov.au/ Opens in a new window

Further study opportunities:

 

  • Brow and lash styling short course
  • Eye lash extension short course
  • Units from Certificate III in Makeup short course
  • Units from Certificate III in Nail Technology short course 
  • Cosmetic Tattoo short course
  • Advanced Cosmetic tattoo short course (pre-requisite – Cosmetic Tattoo short course)
  • Certificate IV in Beauty Therapy
  • Diploma of Beauty Therapy

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

Semester 2

Mandurah - Monday 30 November 6pm-8pm

Overview

Units

Overview
Where Mandurah
How Part Time
Fee
Non concession:
$295
Get started
This skill set or short course is ready to start anytime. Use the course enquiry form at the end of this page to get started.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Advanced Eye Makeup Techniques

State ID: S0140P

This short course gives you additional specialized eye makeup techniques following on from the Makeup Artistry skills set at south Metropolitan TAFE. It enables you to work as a freelance makeup artist or in a hair and beauty salon performing makeup. Students are required to have completed a makeup course to have basic makeup knowledge before enrolling into this course.

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

Semester 2

Mandurah - Wednesday 11 Nov and 18 Nov 6-9pm

Overview

Units

Overview
Where Mandurah
How Part Time
Enquire now
Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.
Murdoch - Tuesday 10 Nov and 17 Nov 6-9pm

Overview

Units

Overview
Where Murdoch
How Part Time
Enquire now
Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Men's Cutting and Grooming

State ID: S0134P

Advance and diversify your skills by becoming a specialist in men's hair design and grooming.

In just 10 weeks (3 hours per week) you will learn to:

  • Provide men's grooming
  • Perform close shaves
  • Design moustaches and bears for the modern man
  • Creative tracking and carving

Monday 7 September - 16 November 2020
Time: 6-9pm
Cost: $580

You must be a qualified hairdresser or achieving your qualification in hairdressing through an apprentice arrangement. 

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

Semester 1

Murdoch - Tuesdays 28 Apr to 30 Jun, 6pm to 9.30pm

Overview

Units

Overview
Where Murdoch
How Part Time
Fee
Non concession:
$580
Enquire now
Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Engineering Revalidation Part C

State ID: S0107P

If you hold an Engineer certificate of competency you should apply to us to revalidate your certificate before it expires, if it has not been suspended or revoked. Whether your certificate is valid, or has expired, the revalidation requirements are the same.

Refer to the AMSA website for further information on revalidation.

Revalidation PART B, common to Masters and Deck Officers

Prerequisites

Prerequisites
A valid or expired Australian Master or Deck Officer Certificate of Competency

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

Semester 1

Fremantle - Various Dates in 2020

Overview

Units

Overview
Where Fremantle
How Part Time
Fee
Non concession:
$2,100.00
Enquire now
Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

Semester 2

Fremantle - Various Dates in 2020

Overview

Units

Overview
Where Fremantle
How Part Time
Fee
Non concession:
$2,100.00
Enquire now
Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Advanced Cosmetic Tattooing Techniques

State ID: S0124P

Want to build on your cosmetic tattooing skills and knowledge? 

If you have previously completed the following 2 units then you are eligible to enrol into this course;

Entrance Requirements

Entrance Requirements
You will need to be able to speak and understand English. If you have previously completed the following 2 units then you are eligible to enrol into this course: • SHBBSKS003 Design and Provide Cosmetic Tattooing • SHBBINF001 Maintain Infection Control Standards

Delivery location, important dates and study options

This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

Semester 2

Murdoch - Thursdays 20 Aug - 24 Sep, 6-9pm

Overview

Units

Overview
Where Murdoch
How Part time
Fee
Non concession:
$2195.00
Enquire now
Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.
Murdoch - Thursdays 29 Oct - 3 Dec, 6-9pm

Overview

Units

Overview
Where Murdoch
How Part time
Fee
Non concession:
$2195.00
Enquire now
Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Advanced Training for Liquified Gas Tanker Cargo Operations

State ID: S0023P

This course is for Masters, Chief Engineers and Chief Mates and provides candidates with the skills and knowledge to meet AMSA requirements for STCW Reg V/1-2 and Code Section A-V/1-2, paragraph 2, Table A-V/1-2-1.

    Please note you must hold the following prerequisites for entry into this course and evidence must be provided upon the first day of class:

    Prerequisites

    Prerequisites
    Please note you must hold the following prerequisites for entry onto this course and evidence must be provided upon first day of class: STCW Advanced Fire Fighting Certificate  STCW Gas Tanker Familiarisation Certificate

    Delivery location, important dates and study options

    This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

    Semester 1

    Fremantle - Monday 17 to Friday 21 February

    Overview

    Units

    Overview
    Where Fremantle
    How Part Time
    Apply now
    Ready to apply for this course? Check out the apply and enrol page for more information.

    Semester 2

    Fremantle - Monday 14 to Friday 18 September

    Overview

    Units

    Overview
    Where Fremantle
    How Part Time
    Fee
    Non concession:
    $2,000.00
    Enquire now
    Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.
    Fremantle - Monday 7 to Friday 11 December

    Overview

    Units

    Overview
    Where Fremantle
    How Part Time
    Fee
    Non concession:
    $2,000.00
    Enquire now
    Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

    Course enquiry

    Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

    For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

    Electrical Contractors Nominees Licence/Electrical Contractors Licence Course

    State ID: S0010P

    Full Electrical Contractors Course

    The full electrical contractors course includes both nominee and business components.

    Course content

    This Electrical Licensing Board-approved course provides theoretical and practical training and is designed to enhance participants’ existing skill sets. The program will not only build upon your current electrical trade studies, it will also improve and refresh your knowledge of:

    Entrance Requirements

    Entrance Requirements

    To be eligible you must hold a current electrical workers licence, restricted licence is not acceptable.

    If you are not working within an electrical contracting company, a person other than an electrical contractor may hold the business aspect of the licence. In this case, the electrical work will only be completed, under that aspect of the licence, by an electrician employed by that company and nominated by that same employer as the Nominees/In-house Licence holder.

    Delivery location, important dates and study options

    This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

    All year round

    Thornlie - Various dates to June 2020

    Overview

    Units

    Overview
    Duration 6 months
    Where Thornlie
    How Short Course (Face to Face)
    Short Course (Online)
    Fee
    Non concession:
    $1,875.00
    Enquire now
    You must have a WA Electrical License to study this course. Use the course enquiry form below to express your interest.

    Course enquiry

    Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

    For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

    Best Ways to Lead, Manage and Retain an Indigenous Workforce

    State ID: S0086P

    Improving retention through self reflection

    Making the decision to employ Aboriginal people is only just the beginning. Taking the time to put some practical strategies in place to create a supportive and culturally secure workplace for Aboriginal employees will not only help to increase retention rates but also produce higher productivity levels for your business.

    Download our flyer

    Delivery location, important dates and study options

    This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

    Semester 2

    Murdoch - 15 - 16 October 2019

    Overview

    Units

    Overview
    Duration 2 days
    Where Murdoch
    How Part Time
    Apply now
    Ready to apply for this course? Check out the apply and enrol page for more information.

    Course enquiry

    Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

    For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

    Dermaplaning

    State ID: S0103P

    Advance your employability skills and build your treatment menu with our Dermaplaning workshops.

    Pre – Requisite: Certificate IV in beauty therapy or Diploma of beauty therapy or qualified enrolled / Registered Nurse qualified

    Job opportunities

    Job opportunities

    Performing Dermaplaning treatments in a salon or spa environment

     

    For information about jobs and pathways, please see http://joboutlook.gov.au/

     

    Further study opportunities:

     

    • Units from Certificate III in Nail Technology short course
    • Cosmetic Tattoo short course
    • Skin Needling short course

     

    Delivery location, important dates and study options

    This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

    Semester 1

    Mandurah - Monday 18 May, 6pm to 9pm

    Overview

    Units

    Overview
    Duration 1 day
    Where Mandurah
    How Part Time
    Fee
    Non concession:
    $330.00
    Enquire now
    Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.
    Murdoch - Monday 25 May, 6pm to 9pm

    Overview

    Units

    Overview
    Duration 1 day
    Where Murdoch
    How Part Time
    Fee
    Non concession:
    $330.00
    Enquire now
    Short courses and skill set courses run subject to demand. Use the course enquiry form at the end of this page to enquire now.

    Semester 2

    Mandurah - Mondays 24 Aug and 2 Nov, 6pm - 9pm

    Overview

    Units

    Overview
    Duration 1 day
    Where Mandurah
    How Part Time
    Fee
    Non concession:
    $330.00
    Apply now
    Ready to apply for this course? Check out the apply and enrol page for more information.
    Murdoch - Mondays, 17 Aug and 9 Nov, 6pm - 9pm

    Overview

    Units

    Overview
    Duration 1 day
    Where Murdoch
    How Part Time
    Fee
    Non concession:
    $330.00
    Apply now
    Ready to apply for this course? Check out the apply and enrol page for more information.

    Course enquiry

    Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

    For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

    Tanker Familiarisation (Liquefied Gas Tanker)

    State ID: S0029P

    This course is for Officers and ratings candidates who are assigned duties and responsibilities relating to tanker operations and provides candidates with the skills and knowledge to meet AMSA requirements for STCW Reg V/1-2 and Code Section A-V/1-2, paragraph 1, Table A-V/1-2-1.

    Please note you must hold the following prerequisites for entry onto this course and evidence must be provided upon first day of class:

    Prerequisites

    Prerequisites
    Please note you must hold the following prerequisites for entry onto this course and evidence must be provided upon first day of class: STCW Fire Fighting Certificate 

    Delivery location, important dates and study options

    This course will be offered with a blended, flexible delivery model to enable social distancing measures to be undertaken during the COVID-19 pandemic. This approach may include a mix of online and classroom based delivery, as well as practical and work experience placements. Lecturers will provide specific instructions to their student groups on how training will be undertaken.

    Semester 2

    Fremantle - 20 - 23 July

    Overview

    Units

    Overview
    Duration 2 days
    Where Fremantle
    How Part Time
    Apply now
    Ready to apply for this course? Check out the apply and enrol page for more information.
    Fremantle - 5 - 8 October

    Overview

    Units

    Overview
    Duration 2 days
    Where Fremantle
    How Part Time
    Apply now
    Ready to apply for this course? Check out the apply and enrol page for more information.

    Course enquiry

    Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

    For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

    Pages