Home | Qualification Level | Advanced Diploma

Advanced Diploma

Advanced Diploma of Network Security

National ID: ICT60215 | State ID: AVX6

Join the professionals in Cyber Security via this Advanced Diploma

With IT encroaching on all aspects of our society, there has never been a greater demand for security. Enhance your career prospects in this exciting field, and gain the skills to put you at the front of the job market. With a shortage of skilled network experts, there has never been a better time to get qualified.

Job opportunities

Study pathway

Job opportunities

   
Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

Delivery location, important dates and study options

Delivery location plans for Semester 1, 2020:

Good news! This course will also be available in Semester 1, 2020 at our Murdoch campus. You can apply now - be sure to enter the national course code ICT60215 and state code AVX6 in your online application, along with Murdoch as your campus.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Advanced Diploma of Accounting

National ID: FNS60217 | State ID: BDQ1

If you enjoy accounting and mathematics, have an analytical mind and would like to work in the accounting profession, then our Advanced Diploma of Accounting is for you. Accountants support their clients with regular monitoring, analysis, preparation of documents, reports and accounts, and advice.

Entrance Requirements

Job opportunities

Entrance Requirements

Completion of both FNSSS00014 Accounting Principles Skill Set and FNSSS00015 Advanced Accounting Principles Skill Set;

FNSSS00014 Accounting Principles Skill Set Skill Set Requirements:

  • FNSACC311 Process financial transactions and extract interim reports
  • FNSACC312 Administer subsidiary accounts and ledgers
  • FNSACC408 Work effectively in the accounting and bookkeeping industry
  • FNSACC416 Set up and operate a computerised accounting system
  • FNSTPB401 Complete business activity and instalment activity statements
  • FNSTPB402 Establish and maintain payroll systems
  • FNSSS00015 Advanced Accounting Principles Skill Set Skill Set Requirements
  • FNSACC511 Provide financial and business performance information
  • FNSACC512 Prepare tax documentation for individuals
  • FNSACC513 Manage budgets and forecasts
  • FNSACC514* Prepare financial reports for corporate entities
  • FNSACC516 Implement and maintain internal control procedures

FNSSS00015 Advanced Accounting Principles Skill  Set Requirements:

  • FNSACC517 Provide management accounting information

*Note the following prerequisite unit requirements.
FNSACC514 Prepare financial reports for corporate entities: Pre-requisites: BSBFIA401 Prepare financial reports and FNSACC311 Process financial transactions and extract interim reports

OR Completion of FNS50215 Diploma of Accounting; OR Completion of FNS50217 Diploma of Accounting.

Job opportunities

As an accounting graduate you will find career opportunities are international and cross-industry. Opening your own accounting practice, working for a multinational, or somewhere in between, this qualification provides the essential fundamental building block to your career in the diverse world of accounting.

 

For information about jobs and pathways, please see http://joboutlook.gov.au/

 

Further study opportunities:

 

  • University

 

Delivery location, important dates and study options

Semester 1

Rockingham - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 1
Where Rockingham
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2

Rockingham - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 2
Where Rockingham
How Full Time
Apply now
This course uses TAFE Admissions. Express your interest in remaining places in Semester 1. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Advanced Diploma of Civil Construction Design

National ID: RII60515 | State ID: AZA8

Construct your future 

Job opportunities

Study pathway

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Study pathway

Become a specialist in your field with university study

This course has a university study pathway as at 30 October 2019.

Curtin University– Bachelor of Engineering (Honours) (Civil and Construction) – 150-200 Credits

Edith Cowan University – Bachelor of Engineering – Up to 90 Credits

Curtin University – Bachelor of Science (Multidisciplinary Science) – 150 Credits

Edith Cowan University – Bachelor of Commerce – Up to 120 Credits

The information about university credit points and tuition costs provides a general guide only. To check the current credit arrangements and to find more information about how credits work at the listed university of your choice, visit TAFE International WA’s University Pathway Finder.

Delivery location, important dates and study options

All year round

Munster - Classroom-Traineeship

Overview

Fees and charges

Units

Overview
Duration 3 years
When All year round
Where Munster
How Part Time
Apply now
Let us help you make the approach to an employer to become their apprentice or trainee.

Semester 1

Munster - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 1
Where Munster
How Full Time
Apply now
This course uses TAFE Admissions. Express your interest in remaining places in Semester 1. 
Munster - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 1
Where Munster
How Full Time
Apply now
This course uses TAFE Admissions. Express your interest in remaining places in Semester 1. 

Semester 2

Munster - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 semester
When Semester 2
Where Munster
How Full Time
Apply now
This course uses TAFE Admissions. Express your interest in remaining places in Semester 1. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Advanced Diploma of Engineering Technology - Electrical

National ID: UEE62111 | State ID: A175

This course leads to a job of the future with STEM skills highly prized in the implementation of smart homes (Internet of Things), automated industrial production line mechatronics, administering or upgrading infrastructure for small to large scale businesses among many other innovative applications.

Find out why engineering design and automation are 'jobs of the future'

Job opportunities

Study pathway

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Study pathway

Part time study is available by enrolling in the three skill sets listed above, which make up the Diploma qualification and provide credit for this Advanced qualification.

Become a specialist in your field with university study

This course has a university study pathway as at 14 August 2019.

Curtin University – Bachelor of Engineering (Honours) – 150-200 credits

Curtin University – Bachelor of Science (Multidisciplinary Science) – 150 credits

Edith Cowan University – Bachelor of Engineering (Electrical and Renewable Energy) (W21) – Up to 120 credits

Edith Cowan University – Bachelor of Engineering (Electrical Power) (Y49) – Up to 120 credits

Edith Cowan University – Bachelor of Engineering (Electronics and Communications) (Y51) – Up to 120 credits

Edith Cowan University – Bachelor of Engineering (Instrumentation Control & Automation) (Y46) – Up to 120 credits

Murdoch University – Bachelor of Engineering (Honours) in Industrial Computer Systems Engineering (H1264) – 6 credits

Murdoch University – Bachelor of Engineering (Honours) in Instrumentation and Control Engineering (H1264) – 6 credits

Murdoch University – Bachelor of Engineering (Honours) in Renewable Energy Engineering (H1264) – 6 credits

The information about university credit points and tuition costs provides a general guide only. To check the current credit arrangements and to find more information about how credits work at the listed university of your choice, visit TAFE International WA’s University Pathway Finder.

Delivery location, important dates and study options

All year round

Munster - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 24 months
When All year round
Where Munster
How Part Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Munster - Part Time-Self Paced External

Overview

Fees and charges

Units

Overview
Duration 24 months
When All year round
Where Munster
How Part Time
Self Paced
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.
Munster - Part Time-Self Paced

Overview

Fees and charges

Units

Overview
Duration 24 months
When All year round
Where Munster
How Part Time
Get started
This course is available to start anytime for online study. 

Semester 1

Munster - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 2 years
When Semester 1
Where Munster
How Full Time
Apply now
This course uses TAFE Admissions. Express your interest in remaining places in Semester 1. 

Semester 2

Munster - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 2 years
When Semester 2
Where Munster
How Full Time
Apply now
This course uses TAFE Admissions. Express your interest in remaining places in Semester 1. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Advanced Diploma of Work Health and Safety

National ID: BSB60615 | State ID: AVR0

Do you have what it takes for an in-demand career managing workplace safety?

When you complete the Advanced Diploma of Work Health and Safety you can expect to be a valued addition to any organisation as a WHS manager. This course provides you with the depth of knowledge to operate as a manager in the safety industry, or as a safety expert in any industry.

Entrance Requirements

Prerequisites

Important information

Job opportunities

Study pathway

Entrance Requirements

All core units from BSB51315 Diploma of Work Health and Safety or equivalent competencies.

Equivalent competencies are predecessors to the following units which have been mapped as equivalent:
◾BSBWHS502 Manage effective WHS consultation and participation processes
◾BSBWHS503 Contribute to the systematic management of WHS risk
◾BSBWHS504 Manage WHS risks
◾BSBWHS505 Investigate WHS incidents
◾BSBWHS506 Contribute to developing, implementing and maintaining WHS management systems

Prerequisites

This course requires the following for entry  Completion of BSB51315 Diploma of Work Health and Safety or the 5 core units listed below. Equivalent competencies are predecessors to the following units which have been mapped as equivalent:

  • BSBWHS502 Manage effective WHS consultation and participation processes
  • BSBWHS503 Contribute to the systematic management of WHS risk
  • BSBWHS504 Manage WHS risks
  • BSBWHS505 Investigate WHS incidents
  • BSBWHS506 Contribute to developing, implementing and maintaining WHS
Important information

Students must have access to a workplace to be able to complete the assessment tasks with a third party sign off.

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Delivery location, important dates and study options

All year round

Thornlie - Part Time-Self Paced

Overview

Fees and charges

Units

Overview
Duration 6 months
When All year round
Where Thornlie
How Part Time
Self Paced
Get started
This course is available to start anytime for online study. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Advanced Diploma of Maritime Operations (Marine Engineering Class 2)

National ID: MAR60115 | State ID: AVQ3

This certificate enables you to work as an engineer on any propulsion power vessel in any operating area performing the functions of:

Job opportunities

Job opportunities

 

 

For information about jobs and pathways, please see http://joboutlook.gov.au/

 

Further study opportunities:

 

  • MAR60215 Advanced Diploma of Maritime Operations (Marine Engineering Class 1), State ID AVQ0

 

Delivery location, important dates and study options

Semester 1

Fremantle - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 year
When Semester 1
Where Fremantle
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Semester 2

Fremantle - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 year
When Semester 2
Where Fremantle
How Full Time
Apply now
This course uses TAFE Admissions. Express your interest in remaining places in Semester 1. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Advanced Diploma of Maritime Operations (Master Unlimited)

National ID: MAR60315 | State ID: AWN9

This certificate allows you to perform the duties or functions of Master, Chief mate or Watchkeeper deck officer on ships of any gross tonnage in any operating area.

Holding a Watchkeeper deck or Master less than 500 GT certificate of competency may allow you to receive up to 15 units credit or recognition of prior learning with continued sea service and competencies. This may potentially reduce the duration of the course up to 14 weeks.

Job opportunities

Job opportunities

 

  • This qualification is aligned to the educational requirement for certification as a Master Unlimited as described in Marine Orders Part 3: Seagoing Qualifications (Version 6) under the Navigation Act 1912

 

 

For information about jobs and pathways, please see http://joboutlook.gov.au/

 

Further study opportunities:

 

  • University

 

Delivery location, important dates and study options

Semester 1

Fremantle - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 3 semesters
When Semester 1
Where Fremantle
How Full Time
Apply now
This course uses TAFE Admissions. Express your interest in remaining places in Semester 1. 

Semester 2

Fremantle - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 3 semesters
When Semester 2
Where Fremantle
How Full Time
Apply now
This course uses TAFE Admissions. Express your interest in remaining places in Semester 1. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Advanced Diploma of Cyber Security

National ID: 22445VIC | State ID: BCZ09

Join the ranks of cyber professionals & get ready for a ‘job of the future’

Malicious cyber activity is growing worldwide, driving a dramatic increase in demand for cyber security solutions. Over the next decade the Australian cyber security industry is forecast to almost triple in size. This growth translates into an additional 11,000 jobs.

See how our Training Cyber Security Operations Centre prepares students to be job ready for an in-demand industry

Entrance Requirements

Job opportunities

Study pathway

Entrance Requirements

This qualification is a progression pathway for students who have studied the Certificate IV in Cyber Security (22334VIC) or is an ideal advanced qualification for those who have had two year's cyber security industry experience. For those who have CISCO certification, or have studied at Diploma level in Networking, Computer Systems Engineering, or Electronics and Communications, or who have studied a Computer Science bachelor degree or higher qualification, the Advanced Diploma can broaden your skills and expertise for the growing job market in cyber security. Make a course enquiry at the end of this page to start a discussion with us as to how your work experience or past studies may assist your entrance into this cyber security qualification.

Job opportunities

   
Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

 

Study pathway

South Metropolitan TAFE has many further study opportunities available.

Plan your study pathway in information technologies

Delivery location, important dates and study options

Semester 1

Murdoch - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 2 semesters
When Semester 1
Where Murdoch
How Full Time
Apply now
This course uses TAFE Admissions. Express your interest in remaining places in Semester 1. 

Semester 2

Murdoch - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 2 semesters
When Semester 2
Where Murdoch
How Full Time
Apply now
This course uses TAFE Admissions. Express your interest in remaining places in Semester 1. 

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Advanced Diploma of Process Plant Technology

National ID: PMA60116 | State ID: BAM9

The Advanced Diploma of Process Plant Technology PMA60116 is an advanced qualification for both school leavers and/or industry professionals looking to progress through to university studies and/or advance their career standing.

See how our students learn in a real-life industry setting equipped with an operating plant! 

Job opportunities

Study pathway

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Study pathway

Become a specialist in your field with university study

This course has a university study pathway as at 11 October 2019.

Edith Cowan University – Bachelor of Engineering (Chemical and Environmental) – Up to 75

Edith Cowan University – Bachelor of Engineering (Petroleum Engineering) – Up to 75

The information about university credit points and tuition costs provides a general guide only. To check the current credit arrangements and to find more information about how credits work at the listed university of your choice, visit TAFE International WA’s University Pathway Finder.

Delivery location, important dates and study options

Semester 1

Munster - Full Time-Classroom

Overview

Fees and charges

Units

Overview
Duration 1 year
When Semester 1
Where Munster
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Advanced Diploma of Applied Fashion Design and Merchandising

National ID: MST60119 | State ID: BEP4

Launch into a career in fashion

When you complete the Advanced Diploma of Applied Fashion Design and Merchandising at Bentley, you’re ready to work as a fashion designer, product developer, production manager, CAD operator, CAM (Computer Aided Manufacturing) operator, distribution coordinator, fashion/ textile and colour forecaster, garment finisher, pattern grader/maker, production consultant, or specialised construction machinist.

Entrance Requirements

Job opportunities

Entrance Requirements

Requires completion of MST50116 Diploma of Applied Fashion Design and Merchandising or equivalent

Job opportunities

Please note this list should be used as a guide only as job titles and qualification requirements may vary between organisations.

SM TAFE actively promotes the employment availability of course graduates to key industry partners and organisations. We also seek expressions of interest from organisations for the placement of our students into work experience. We endeavour to assist students into a career pathway, but please be aware that neither employment nor work experience placement is guaranteed by us.

To access free career planning and job search assistance, visit the Jobs and Skills Centres page.

Delivery location, important dates and study options

Semester 1

Bentley - Full time-Classroom

Overview

Fees and charges

Units

Overview
Duration 2 semesters
When Semester 1
Where Bentley
How Full Time
Apply now
Ready to apply for this course? Check out the apply and enrol page for more information.

Course enquiry

Please note: Using this form will assist you in requesting further information about a course, and in the case of short courses and skill sets, begin your application to study with us. If you would like to apply for a full or part time course or require further application information, please see the instructions against your preferred delivery location and study mode in the section immediately above this form. 

For short courses and skill sets, your enquiry using this form can be the start of your application, or you can ask for more information if you don't feel ready.

Pages