, , ,
Home | Courses | Diploma of Information Technology Networking

Diploma of Information Technology Networking

Yes
National ID: ICT50415 | State ID: AWD7

 

Are you looking to embark on a high end IT networking career?

When you complete the Diploma of Information Technology Networking you will be an attractive applicant for in-demand IT roles such as network manager, IT administrator, or network administrator.

You will gain the career enhancing knowledge and skills to: manage complex networks; configure virtual computing environments; apply advanced switching skills; implement active directories; administer Office 365 systems, manage data storage systems. The course has embedded studies in Cisco, Microsoft Server and VMware.

You will acquire valuable experience in current industry standards, reviewing new technology, and with workplace health and safety.

South Metro TAFE has been a Cisco Academy for over ten years. With high levels of equipment and fully trained instructors this is the place to study in the Networking pathway or to undertake vendor certification studies.

It is expected that students entering Diploma level studies have the knowledge and/or experience equivalent to that gained in completing the relevant certificate IV course. The course builds on existing skills and does not "start from the beginning".

Completion of the Diploma of Information Technology Networking opens up a range of further study options and it may produce advanced standing towards a university degree.

Note: the course duration on the Rockingham campus is two semesters. At the Murdoch and Thornlie campuses the course is done in one semester. Applicants may choose at which campus they wish to study.

The Centre for IT Excellence (CITE) provides state of the art, industry relevant training in information technology, creative media and electronics. We provide pathways from foundation studies to advanced diploma with specialist training in cyber security, systems and programming.

Loading video, please wait.

Shak looks to the cloud with networking skills

Entrance Requirements

Prerequisites

Study pathway

Job opportunities

Important information

Entrance Requirements
School Leaver Non-School Leaver AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent Completion of WACE General or ATAR or equivalent (minimum C Grades) Certificate III
Prerequisites
Study pathway
Job opportunities

  • When you complete the Diploma of Information Technology Networking you will be an attractive applicant for in-demand IT roles such as IT administrator, or network administrator.

For information about jobs and pathways, please see
http://joboutlook.gov.au/

Further study opportunities:

  • ICT60215 Advanced Diploma of Network Security, State ID AVX6 
Important information

Delivery location, important dates and study options

Overview

Fees and charges

Units

How to apply

Overview

Course Overview

Where Murdoch
Thornlie
Duration

One semester full-time

HowFull Time (On Campus)
Part Time
WhenTypically available in Semester 1
Available Semester 2, 2019
Fees and charges

Please contact the college to receive an indicative price for this course.

View our 2019 Indicative Fees list.

These fees are indicative only for students enrolling in government funded courses on a full time basis.

The indicative fees for a course may differ between training providers due to the units they have included in the course outline. These differences generally result from adapting courses to meet local industry needs. The actual cost of a course will also vary if different electives are chosen by the student.

Other charges may apply.

VET Student Loans 

Students in an eligible diploma qualifications and above may be assisted through a loan under the Commonwealth Government's VET Student Loan scheme. For more information on entrance requirements and eligible course list please see www.education.gov.au/vet-student-loans 

For information on VET Student Loans at South Metropolitan TAFE please visit the Student Loans page.

International students

Fees, charges, available locations, applications, and enrolment procedures for international students are different to those applicable to local students.

International students can only study full-time.

For information on international student fees and application, please follow this link to the  TAFE International WA website 

Units

Active Directory
Unit Title National ID Unit of Study
Design, build and test a network serverICTNWK505AUV09
Install and maintain valid authentication processesICTNWK503AUV00
Manage network securityICTNWK511AUU97
Complex Networks
Unit Title National ID Unit of Study
Install and manage complex ICT networksICTNWK529AUV29
Produce an ICT network architecture designICTTEN611AWC92
Copyright and Ethics
Unit Title National ID Unit of Study
Contribute to copyright, ethics and privacy in an ICT environmentICTICT418AUU49
Exchange
Unit Title National ID Unit of Study
Implement secure encryption technologiesICTNWK502AUU96
Plan, implement and test enterprise communication solutionsICTNWK501AUV02
Storage
Unit Title National ID Unit of Study
Gather data to identify business requirementsICTICT509AUU63
Install and configure network access storage devicesICTNWK524AUV12
Match ICT needs with the strategic direction of the enterpriseICTICT511AUU64
Research and review hardware technology options for organisationsICTICT501AUU58
Switching
Unit Title National ID Unit of Study
Configure and troubleshoot advanced network switchingICTTEN422AWD29
Determine best-fit topology for a wide area networkICTNWK517AUV07
Virtualisation
Unit Title National ID Unit of Study
Configure and manage advanced virtual computing environmentsICTNWK533AUV15
Implement server virtualisation for a sustainable ICT systemICTSUS501AWD75
How to apply

This course uses TAFE Admissions. To study full-time in Semester two 2019, apply through tasonline.tafe.wa.edu.au/ on or after May 1st, 2019 and before June 10th 2019.

  • For apprenticeships and traineeships (where available), you must be employed in a training contract by an appropriate organisation to study.
  • For international students (where available), contact
    www.tafeinternational.wa.edu.au.
  • For all other courses, or if you need help or have questions please contact us via one of the methods below.

Please note: All enrolling students will require a Unique Student Identifier number.

If you are unsure if you have the entry requirements (meet one of the three alternatives under Entrance Requirements, where applicable), please apply anyway with as much information as you can provide, alternatives such as literacy or numeracy tests, or entry based on past experience may be possible.

For more information, contact us:
webform:  (below) 
phone:  1800 001 001 
email:   info@smtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalentCompletion of WACE General or ATAR or equivalent (minimum C Grades)Certificate III

Enquire now
Call us
Email us

Please make sure you select a campus in the units tab otherwise no course study plan information will be printed.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

This course uses TAFE Admissions. To study full-time in Semester two 2019, apply through tasonline.tafe.wa.edu.au/ on or after May 1st, 2019 and before June 10th 2019.

  • For apprenticeships and traineeships (where available), you must be employed in a training contract by an appropriate organisation to study.
  • For international students (where available), contact
    www.tafeinternational.wa.edu.au.
  • For all other courses, or if you need help or have questions please contact us via one of the methods below.

Please note: All enrolling students will require a Unique Student Identifier number.

If you are unsure if you have the entry requirements (meet one of the three alternatives under Entrance Requirements, where applicable), please apply anyway with as much information as you can provide, alternatives such as literacy or numeracy tests, or entry based on past experience may be possible.

For more information, contact us:
webform:  (below) 
phone:  1800 001 001 
email:   info@smtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalentCompletion of WACE General or ATAR or equivalent (minimum C Grades)Certificate III

This course uses TAFE Admissions. To study full-time in Semester two 2019, apply through tasonline.tafe.wa.edu.au/ on or after May 1st, 2019 and before June 10th 2019.

  • For apprenticeships and traineeships (where available), you must be employed in a training contract by an appropriate organisation to study.
  • For international students (where available), contact
    www.tafeinternational.wa.edu.au.
  • For all other courses, or if you need help or have questions please contact us via one of the methods below.

Please note: All enrolling students will require a Unique Student Identifier number.

If you are unsure if you have the entry requirements (meet one of the three alternatives under Entrance Requirements, where applicable), please apply anyway with as much information as you can provide, alternatives such as literacy or numeracy tests, or entry based on past experience may be possible.

For more information, contact us:
webform:  (below) 
phone:  1800 001 001 
email:   info@smtafe.wa.edu.au

Entrance Requirements

School Leaver Non-School Leaver AQF Completion of WACE General or ATAR (Minimum C Grades) or equivalentCompletion of WACE General or ATAR or equivalent (minimum C Grades)Certificate III

Qualification level

1
Available Semester 2, 2019
1
Typically available in Semester 1

Clean up clone

Link to photo for PDF:

Photo override if needed:

Course title:

National and state ID:

About this course:

Overview:

Entrance requirements:

Entrance requirements additional text:

Prerequisites

Study pathway

Job opportunities

Important information

Fees and charges

How to apply

Print units tab

Units

Generic info:

Page last updated April 16, 2019