Certificate IV in Engineering (Welding)

National ID: MEM40105 State ID: WT42

-- OR --

All year round

Naval Base - Part Time-Classroom

All year round

Naval Base - Part Time-Classroom

Rockingham - Part Time-Classroom

This is a training program that leads to the completion of the Metals and Engineering Training Package MEM05 qualification MEM40105. This qualification is designed to reflect the role of team leaders and supervisors in the industry sector.

This qualification is directly aligned with priority industry areas where the jobs are today, and into the future. As part of the state government Lower fees, local skills initiative, from 1 January 2021 through to 31 December 2021 you'll only pay half the course fees (plus resource fee), capped at $1,200; or $400 if you're aged 15—24 or eligible for a concession. Find out more.

This course is part of the Lower fees, local skills initiative where you'll only pay half the course fees from until December 2021 capped at $1,200; or $400 if you're aged 15—24 or eligible for a concession. Find out more

Only course fees are half price. You may be required to pay other fees that apply to your course.

^ You will pay half price for the course fees on the Lower fees, local skills qualifications, however other fees may apply such as for resources that are specifically needed for your course.

Entrance Requirements
Job Opportunities

Entrance Requirements

School Leaver	Non-School Leaver	AQF
C Grades in Year 11 WACE General English, and OLNA; or NAPLAN 9 Band 8	C Grades in Year 11 English and Maths or equivalent	Certificate II or Certificate III

Job Opportunities

This qualification will allow you to undertake post trade studies in a range of specialisations to enhance you trade specialisation to move into another specialisation. The opportunity for specialising technically or moving into a more technical supervisor position is avaiable with further flexibility at the Diploma level.

Further career pathway information is available at: - getaccess.westone.wa.gov.au(opens in a new tab) - www.myfuture.edu.au(opens in a new tab)

Further study opportunities:

Diploma of Engineering -Advanced Trade (MEM50105)

Study options and next steps

Click on your preferred study mode below to get started with your application or enrolment.

All year round

Details

Duration	2 Years
When	All year round
Where	Naval Base
How	Part Time-Classroom

Units

Indicative fees and charges

2021 General Admission fees list (362 KB)

Fees and charges published on our website are indicative. Your fees will depend on your eligibility for government funding or a concession rate, and the units you choose to study or seek to be recognised under Recognition of Prior Learning (RPL). Our Indicative fees lists show fees that are:

Based on the full possible study plan of units, including the recommended electives
Based on full time study in 2021
Charged at the government funded rate for over 18 years of age students
Based on unit electives designed to meet localised industry demand for skills
Made up of course fees and resource fees, or RPL fees. Course fees are the cost of your tuition, while resource fees pay for consumables provided to you to aid your study (such as printing and paper). You may also be required to purchase text books or equipment that are not part of our tuition or resource fees.

Fees may vary between students and between educational providers. Other charges may apply.

Visit our Fees(opens in a new tab) page for more information.

Call 1800 001 001 to get a more accurate fee indication based on your eligibility and study plan before applying.

VET Student Loans

Selected courses are VET Student Loan eligible courses.

A VET Student Loan creates a debt that must be repaid to the Commonwealth and is only available to students who are eligible.

To find out if you are eligible or to see the list of eligible courses visit our Student Loans page.

International students

Selected courses are available to International students for full time study only.

Fees, charges, available locations, applications and enrolment procedures for International students are different to those for students who have Australian permanent residency.

For more information or to find a course visit the TAFE International WA(opens in a new tab) website.

Apprenticeships and traineeships

2021 Apprenticeship/Traineeship fees list (185 KB) (PDF document - opens in a new tab)

Fees for apprenticeships and traineeships are charged at a rate per nominal hour of study. This means that your fees will vary depending on the units you study as part of your training plan.

Apprentices and trainees are liable to pay for their own fees but some industrial agreements (awards) dictate that employers are required to reimburse their apprentice upon receipt of satisfactory progress. An employer may also opt to pay on behalf of the apprentice or trainee.

For more information visit our Apprenticeships and traineeships page.

Recognition of Prior Learning

Recognition of Prior Learning (RPL) enrolments are charged at $3.25 per nominal hour of study.

No concession fees apply to RPL enrolments. Refer to the institutional or apprenticeship/traineeship fee list above for an indicative RPL course fee.

To get started with RPL, visit the Recognition of Prior Learning page.

Elective

National ID	Unit Title
MEM03003B	Perform sheet and plate assembly
MEM05004C	Perform routine oxy acetylene welding
MEM05005B	Carry out mechanical cutting
MEM05006C	Perform brazing and or silver soldering
MEM05007C	Perform manual heating and thermal cutting
MEM05008C	Perform advanced manual thermal cutting, gouging and shaping
MEM05012C	Perform routine manual metal arc welding
MEM05013C	Perform manual production welding
MEM05014C	Monitor quality of production welding/fabrications
MEM05015D	Weld using manual metal arc welding process
MEM05017D	Weld using gas metal arc welding process
MEM05018C	Perform advanced welding using gas metal arc welding process
MEM05019D	Weld using gas tungsten arc welding process
MEM05020C	Perform advanced welding using gas tungsten arc welding process
MEM05023C	Weld using submerged arc welding process
MEM05026C	Apply welding principles
MEM05042B	Perform welds to code standards using flux core arc welding process
MEM05043B	Perform welds to code standards using gas metal arc welding process
MEM05044B	Perform welds to code standards using gas tungsten arc welding process
MEM05045B	Perform pipe welds to code standards using manual metal arc welding process
MEM05046B	Perform welds to code standards using manual metal arc welding process
MEM05047B	Weld using flux core arc welding process
MEM05048B	Perform advanced welding using flux core arc welding process
MEM05049B	Perform routine gas tungsten arc welding
MEM05050B	Perform routine gas metal arc welding
MEM05051A	Select welding processes
MEM05052A	Apply safe welding practices
MEM06007B	Perform basic incidental heat/quenching, tempering and annealing
MEM09002B	Interpret technical drawing
MEM18001C	Use hand tools
MEM18002B	Use power tools/hand held operations
MEM05016C	Perform advanced welding using manual metal arc welding process

Core

National ID	Unit Title
MEM12023A	Perform engineering measurements
MEM12024A	Perform computations
MEM13014A	Apply principles of occupational health and safety in the work environment
MEM14004A	Plan to undertake a routine task
MEM14005A	Plan a complete activity
MEM15002A	Apply quality systems
MEM15024A	Apply quality procedures
MEM16006A	Organise and communicate information
MEM16007A	Work with others in a manufacturing, engineering or related environment
MEM16008A	Interact with computing technology
MEM17003A	Assist in the provision of on the job training
MSAENV272B	Participate in environmentally sustainable work practices

All year round

Naval Base - Part Time-Classroom

Details
Units

Details

Duration	2 Years
When	All year round
Where	Naval Base
How	Part Time-Classroom

Units

Indicative fees and charges

2021 General Admission fees list (362 KB)

Based on the full possible study plan of units, including the recommended electives
Based on full time study in 2021
Charged at the government funded rate for over 18 years of age students
Based on unit electives designed to meet localised industry demand for skills
Made up of course fees and resource fees, or RPL fees. Course fees are the cost of your tuition, while resource fees pay for consumables provided to you to aid your study (such as printing and paper). You may also be required to purchase text books or equipment that are not part of our tuition or resource fees.

Fees may vary between students and between educational providers. Other charges may apply.

Visit our Fees(opens in a new tab) page for more information.

Call 1800 001 001 to get a more accurate fee indication based on your eligibility and study plan before applying.

VET Student Loans

Selected courses are VET Student Loan eligible courses.

A VET Student Loan creates a debt that must be repaid to the Commonwealth and is only available to students who are eligible.

To find out if you are eligible or to see the list of eligible courses visit our Student Loans page.

International students

Selected courses are available to International students for full time study only.

Fees, charges, available locations, applications and enrolment procedures for International students are different to those for students who have Australian permanent residency.

For more information or to find a course visit the TAFE International WA(opens in a new tab) website.

Apprenticeships and traineeships

2021 Apprenticeship/Traineeship fees list (185 KB) (PDF document - opens in a new tab)

Fees for apprenticeships and traineeships are charged at a rate per nominal hour of study. This means that your fees will vary depending on the units you study as part of your training plan.

For more information visit our Apprenticeships and traineeships page.

Recognition of Prior Learning

Recognition of Prior Learning (RPL) enrolments are charged at $3.25 per nominal hour of study.

No concession fees apply to RPL enrolments. Refer to the institutional or apprenticeship/traineeship fee list above for an indicative RPL course fee.

To get started with RPL, visit the Recognition of Prior Learning page.

Elective

National ID	Unit Title
MEM03003B	Perform sheet and plate assembly
MEM05004C	Perform routine oxy acetylene welding
MEM05005B	Carry out mechanical cutting
MEM05006C	Perform brazing and or silver soldering
MEM05007C	Perform manual heating and thermal cutting
MEM05008C	Perform advanced manual thermal cutting, gouging and shaping
MEM05012C	Perform routine manual metal arc welding
MEM05013C	Perform manual production welding
MEM05014C	Monitor quality of production welding/fabrications
MEM05015D	Weld using manual metal arc welding process
MEM05016C	Perform advanced welding using manual metal arc welding process
MEM05017D	Weld using gas metal arc welding process
MEM05018C	Perform advanced welding using gas metal arc welding process
MEM05019D	Weld using gas tungsten arc welding process
MEM05020C	Perform advanced welding using gas tungsten arc welding process
MEM05023C	Weld using submerged arc welding process
MEM05026C	Apply welding principles
MEM05042B	Perform welds to code standards using flux core arc welding process
MEM05043B	Perform welds to code standards using gas metal arc welding process
MEM05044B	Perform welds to code standards using gas tungsten arc welding process
MEM05045B	Perform pipe welds to code standards using manual metal arc welding process
MEM05046B	Perform welds to code standards using manual metal arc welding process
MEM05047B	Weld using flux core arc welding process
MEM05048B	Perform advanced welding using flux core arc welding process
MEM05049B	Perform routine gas tungsten arc welding
MEM05050B	Perform routine gas metal arc welding
MEM05051A	Select welding processes
MEM05052A	Apply safe welding practices
MEM06007B	Perform basic incidental heat/quenching, tempering and annealing
MEM09002B	Interpret technical drawing
MEM18001C	Use hand tools
MEM18002B	Use power tools/hand held operations

Core

National ID	Unit Title
MEM12023A	Perform engineering measurements
MEM12024A	Perform computations
MEM13014A	Apply principles of occupational health and safety in the work environment
MEM14004A	Plan to undertake a routine task
MEM14005A	Plan a complete activity
MEM15002A	Apply quality systems
MEM15024A	Apply quality procedures
MEM16006A	Organise and communicate information
MEM16007A	Work with others in a manufacturing, engineering or related environment
MEM16008A	Interact with computing technology
MEM17003A	Assist in the provision of on the job training
MSAENV272B	Participate in environmentally sustainable work practices

Rockingham - Part Time-Classroom

Details
Units

Details

Duration	2 Years
When	All year round
Where	Rockingham
How	Part Time-Classroom

Units

Indicative fees and charges

2021 General Admission fees list (362 KB)

Based on the full possible study plan of units, including the recommended electives
Based on full time study in 2021
Charged at the government funded rate for over 18 years of age students
Based on unit electives designed to meet localised industry demand for skills
Made up of course fees and resource fees, or RPL fees. Course fees are the cost of your tuition, while resource fees pay for consumables provided to you to aid your study (such as printing and paper). You may also be required to purchase text books or equipment that are not part of our tuition or resource fees.

Fees may vary between students and between educational providers. Other charges may apply.

Visit our Fees(opens in a new tab) page for more information.

Call 1800 001 001 to get a more accurate fee indication based on your eligibility and study plan before applying.

VET Student Loans

Selected courses are VET Student Loan eligible courses.

A VET Student Loan creates a debt that must be repaid to the Commonwealth and is only available to students who are eligible.

To find out if you are eligible or to see the list of eligible courses visit our Student Loans page.

International students

Selected courses are available to International students for full time study only.

Fees, charges, available locations, applications and enrolment procedures for International students are different to those for students who have Australian permanent residency.

For more information or to find a course visit the TAFE International WA(opens in a new tab) website.

Apprenticeships and traineeships

2021 Apprenticeship/Traineeship fees list (185 KB) (PDF document - opens in a new tab)

Fees for apprenticeships and traineeships are charged at a rate per nominal hour of study. This means that your fees will vary depending on the units you study as part of your training plan.

For more information visit our Apprenticeships and traineeships page.

Recognition of Prior Learning

Recognition of Prior Learning (RPL) enrolments are charged at $3.25 per nominal hour of study.

No concession fees apply to RPL enrolments. Refer to the institutional or apprenticeship/traineeship fee list above for an indicative RPL course fee.

To get started with RPL, visit the Recognition of Prior Learning page.

Elective

National ID	Unit Title
MEM03003B	Perform sheet and plate assembly
MEM05004C	Perform routine oxy acetylene welding
MEM05005B	Carry out mechanical cutting
MEM05006C	Perform brazing and or silver soldering
MEM05007C	Perform manual heating and thermal cutting
MEM05008C	Perform advanced manual thermal cutting, gouging and shaping
MEM05012C	Perform routine manual metal arc welding
MEM05013C	Perform manual production welding
MEM05014C	Monitor quality of production welding/fabrications
MEM05015D	Weld using manual metal arc welding process
MEM05016C	Perform advanced welding using manual metal arc welding process
MEM05017D	Weld using gas metal arc welding process
MEM05018C	Perform advanced welding using gas metal arc welding process
MEM05019D	Weld using gas tungsten arc welding process
MEM05020C	Perform advanced welding using gas tungsten arc welding process
MEM05023C	Weld using submerged arc welding process
MEM05026C	Apply welding principles
MEM05042B	Perform welds to code standards using flux core arc welding process
MEM05043B	Perform welds to code standards using gas metal arc welding process
MEM05044B	Perform welds to code standards using gas tungsten arc welding process
MEM05045B	Perform pipe welds to code standards using manual metal arc welding process
MEM05046B	Perform welds to code standards using manual metal arc welding process
MEM05047B	Weld using flux core arc welding process
MEM05048B	Perform advanced welding using flux core arc welding process
MEM05049B	Perform routine gas tungsten arc welding
MEM05050B	Perform routine gas metal arc welding
MEM05051A	Select welding processes
MEM05052A	Apply safe welding practices
MEM06007B	Perform basic incidental heat/quenching, tempering and annealing
MEM09002B	Interpret technical drawing
MEM18001C	Use hand tools
MEM18002B	Use power tools/hand held operations

Core

National ID	Unit Title
MEM12023A	Perform engineering measurements
MEM12024A	Perform computations
MEM13014A	Apply principles of occupational health and safety in the work environment
MEM14004A	Plan to undertake a routine task
MEM14005A	Plan a complete activity
MEM15002A	Apply quality systems
MEM15024A	Apply quality procedures
MEM16006A	Organise and communicate information
MEM16007A	Work with others in a manufacturing, engineering or related environment
MEM16008A	Interact with computing technology
MEM17003A	Assist in the provision of on the job training
MSAENV272B	Participate in environmentally sustainable work practices

Get help

Please note This form is only for course enquiries. If you would like to apply, please refer to the 'Study options and next steps' section above.

First name

Last name

Course name

Delivery location

Preferred delivery mode

Full time

Part time

Online

Have you studied with us before?

Yes

How did you hear about us?

Message

MEM40105 Certificate IV in Engineering (Welding)

All year round

All year round

Study options and next steps

All year round

Naval Base - Part Time-Classroom

Get started

All year round

Naval Base - Part Time-Classroom

Get started

Rockingham - Part Time-Classroom

Get started

Get help