Home | Courses | Certificate III in Wall And Ceiling Lining

Certificate III in Wall And Ceiling Lining

National ID: CPC31211 | State ID: D401

 

Do you want to build a lifetime career that others will look up to?

When you complete the Certificate III in Wall and Ceiling Lining you will be ready for a certified trade career as a wall and ceiling liner.

You will gain the knowledge and skills to fix plasterboard sheets to walls and ceilings; mix plastering compounds; install suspended ceilings; construct bulkheads; interpret plans; and apply WHS requirements.

The Certificate III in Wall and Ceiling Lining is an apprenticeship: you must be employed in a training contract by an appropriate organisation to study. Please see the Apprenticeships section for more information.

Entrance Requirements

Study pathway

Job opportunities

Entrance Requirements
Study pathway
Job opportunities

Your qualification prepares you for roles such as:

When you complete the Certificate III in Wall and Ceiling Lining you will be ready for a certified trade career as a wall and ceiling liner.

For information about jobs and pathways, please see
http://joboutlook.gov.au/

Further study opportunities:

Certificate IV in Building and Construction

Delivery location, important dates and study options

Overview

Fees and charges

Units

How to apply

Important information

Overview

Course Overview

Where Rockingham
Duration
HowApprenticeship
WhenAvailable Semester 1, 2018
Fees and charges

Please contact the college to receive an indicative price for this course.

View our 2017 Indicative Fees list.

These fees are indicative only for students enrolling in government funded courses on a full time basis.

The indicative fees for a course may differ between training providers due to the units they have included in the course outline. These differences generally result from adapting courses to meet local industry needs. The actual cost of a course will also vary if different electives are chosen by the student.

Other charges may apply.

VET Student Loans 

Students in an eligible diploma qualifications and above may be assisted through a loan under the Commonwealth Government's VET Student Loan scheme. For more information on entrance requirements and eligible course list please see www.education.gov.au/vet-student-loans 

For information on VET Student Loans at South Metropolitan TAFE please visit the Student Loans page.

International students

Fees, charges, available locations, applications, and enrolment procedures for international students are different to those applicable to local students.

International students can only study full-time.

For information on international student fees and application, please follow this link to the  TAFE International WA website 

Units

The units in Traineeships and Apprenticeships are customised according to the individual Training Agreement that is negotiated with the employer and may vary (within the Qualification rules) in each case.

Cluster 1
Unit Title National ID Unit of Study
Apply OHS requirements, policies and procedures in the construction industryCPCCOHS2001AW9435
Work effectively and sustainably in the construction industryCPCCCM1012AD7347
Cluster 10
Unit Title National ID Unit of Study
Assemble partitionsCPCCCA3015AW9354
Cluster 11
Unit Title National ID Unit of Study
Fix ceiling sheets to external protected areasCPCCPB3005AW9445
Cluster 12
Unit Title National ID Unit of Study
Use mechanical jointing equipment to finish jointsCPCCPB3022AW9462
Use vacuum and electric sanding equipment to finish plaster workCPCCPB3018AW9458
Cluster 13
Unit Title National ID Unit of Study
Install dry wall passive fire-rated systemsCPCCWC3003AW9606
Cluster 14
Unit Title National ID Unit of Study
Install batt insulation productsCPCCPB3014AW9454
Install suspended ceilingsCPCCWC3004AW9607
Cluster 2
Unit Title National ID Unit of Study
Carry out measurements and calculationsCPCCCM1015AD7350
Conduct workplace communicationCPCCCM1014AD7349
Plan and organise workCPCCCM1013AD7348
Cluster 3
Unit Title National ID Unit of Study
Read and interpret plans and specificationsCPCCCM2001AW9370
Work safely at heightsCPCCCM2010BWE987
Cluster 4
Unit Title National ID Unit of Study
Fix standard plasterboard ceiling sheetsCPCCPB3002AW9442
Fix standard plasterboard wall sheetsCPCCPB3001AW9441
Cluster 5
Unit Title National ID Unit of Study
Finish plasterboard joins manuallyCPCCPB3009AW9449
Manually sand plaster workCPCCPB3010AW9450
Mix plastering compoundsCPCCPB3008AW9448
Cluster 6
Unit Title National ID Unit of Study
Apply levels of finish standards to planning and inspection of own workCPCCPB3007AW9447
Cut and fix paper-faced cornicesCPCCPB3012AW9452
Fix battensCPCCPB3003AW9443
Cluster 7
Unit Title National ID Unit of Study
Fix wet area sheetsCPCCPB3004AW9444
Cluster 8
Unit Title National ID Unit of Study
Finish category 1 and 2 wet areasCPCCPB3011AW9451
Fix fibre cement boardCPCCPB3006AW9446
Cluster 9
Unit Title National ID Unit of Study
Construct bulkheadsCPCCCA3014AW9353
How to apply
Important information
Enquire now
Call us
Email us

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

  • This course will not use TAFE Admissions for Semester One 2018, please apply direct to South Metropolitan TAFE as per below.
  • For apprenticeships and traineeships (where available), you must be employed in a training contract by an appropriate organisation to study.
  • For international students (where available), contact
    www.tafeinternational.wa.edu.au.
  • For all other courses, or if you need help or have questions please call us on
    1800 001 001 or email us at info@smtafe.wa.edu.au

Please note: All enrolling students will require a Unique Student Identifier number.

If you are unsure if you have the entry requirements, please apply anyway with as much information as you can provide, alternatives such as literacy or numeracy tests, or entry based on past experience may be possible. 1800 001 001 for more information.

Entrance Requirements

School Leaver Non-School Leaver AQF
OLNA or NAPLAN 9 Band 8C Grades in Year 10 English and Maths or equivalentCertificate I or Certificate II

  • This course will not use TAFE Admissions for Semester One 2018, please apply direct to South Metropolitan TAFE as per below.
  • For apprenticeships and traineeships (where available), you must be employed in a training contract by an appropriate organisation to study.
  • For international students (where available), contact
    www.tafeinternational.wa.edu.au.
  • For all other courses, or if you need help or have questions please call us on
    1800 001 001 or email us at info@smtafe.wa.edu.au

Please note: All enrolling students will require a Unique Student Identifier number.

If you are unsure if you have the entry requirements, please apply anyway with as much information as you can provide, alternatives such as literacy or numeracy tests, or entry based on past experience may be possible. 1800 001 001 for more information.

Entrance Requirements

School Leaver Non-School Leaver AQF OLNA or NAPLAN 9 Band 8C Grades in Year 10 English and Maths or equivalentCertificate I or Certificate II

Links

Page last updated September 20, 2017