Home | Courses | CERTIFICATE III IN ENGINEERING-FABRICATION TRADE [SURFACE FINISHING]

CERTIFICATE III IN ENGINEERING-FABRICATION TRADE [SURFACE FINISHING]

National ID: MEM30305 | State ID: WA86

 

Studying this qualification at South Metropolitan TAFE will provide you with a qualification that gives you options to work in the surface preparation and coating industry in areas such as oil and gas, marine, plant construction and maintenance, defence and site maintenance. This qualification covers surface preparation, including blasting and high pressure jetting, protective coating applications, welding and surface testing.

The Certificate III in Engineering - Fabrication Trade (Surface Finishing) is an apprenticeship: you must be employed in a training contract by an appropriate organisation to study. Please see the Apprenticeships section for more information.

Entrance Requirements

Study pathway

Job opportunities

Entrance Requirements
Study pathway
Job opportunities

Your qualification prepares you for roles such as:

  • Studying this qualification at South Metropolitan TAFE will provide you with a qualification that gives you options to work in the surface preparation and coating industry in areas such as oil and gas, marine, plant construction and maintenance, defence and site maintenance.

For information about jobs and pathways, please see
http://joboutlook.gov.au/

Delivery location, important dates and study options

Overview

Fees and charges

Units

How to apply

Important information

Overview

Course Overview

Where Carlisle
Duration
HowApprenticeship
WhenAvailable Semester 1, 2018
Fees and charges

Please contact the college to receive an indicative price for this course.

View our 2017 Indicative Fees list.

These fees are indicative only for students enrolling in government funded courses on a full time basis.

The indicative fees for a course may differ between training providers due to the units they have included in the course outline. These differences generally result from adapting courses to meet local industry needs. The actual cost of a course will also vary if different electives are chosen by the student.

Other charges may apply.

VET Student Loans 

Students in an eligible diploma qualifications and above may be assisted through a loan under the Commonwealth Government's VET Student Loan scheme. For more information on entrance requirements and eligible course list please see www.education.gov.au/vet-student-loans 

For information on VET Student Loans at South Metropolitan TAFE please visit the Student Loans page.

International students

Fees, charges, available locations, applications, and enrolment procedures for international students are different to those applicable to local students.

International students can only study full-time.

For information on international student fees and application, please follow this link to the  TAFE International WA website 

Units

The units in Traineeships and Apprenticeships are customised according to the individual Training Agreement that is negotiated with the employer and may vary (within the Qualification rules) in each case.

Group 1
Unit Title National ID Unit of Study
Apply principles of occupational health and safety in the work environmentMEM13014AW5502
Apply quality proceduresMEM15024AW5531
Apply quality systemsMEM15002AW5532
Interact with computing technologyMEM16008AW5452
Organise and communicate informationMEM16006AW5451
Participate in environmentally sustainable work practicesMSAENV272BD3655
Plan a complete activityMEM14005AW5513
Plan to undertake a routine taskMEM14004AW5512
Work with others in a manufacturing, engineering or related environmentMEM16007AW5548
Group 2
Unit Title National ID Unit of Study
Conduct local risk controlRIIRIS201BD9322
Perform operational maintenance of machines/equipmentMEM07001BW5364
Prepare spray painting materials and equipmentAURVTP2003WF522
Undertake manual handlingMEM11011BW5466
Use hand toolsMEM18001CW5563
Use power tools/hand held operationsMEM18002BW5574
Work in accordance with an issued permitMSAPMPER200CD3652
Work safely with industrial chemicals and materialsMEM13003BW5505
Group 3
Unit Title National ID Unit of Study
Apply protective coatings (basic)MEM08014BW5394
Control blast coating by-products, materials and emissionsMEM08016BW5396
Prepare surfaces by abrasive blasting (basic)MEM08012BW5392
Prepare surfaces for coatingPMBPROD248CW7580
Prepare surfaces using solvents and/or mechanical meansMEM08011BW5391
Pre-treat work for subsequent surface coatingMEM08002CW5401
Group 4
Unit Title National ID Unit of Study
Handle/move bulk fluids/gasesMEM11009BW5486
Interpret technical drawingMEM09002BW5418
Perform engineering measurementsMEM12023AW5492
Perform inspectionMEM15004BW5534
Use comparison and basic measuring devicesMEM12001BW5488
Group 5
Unit Title National ID Unit of Study
Apply protective coatings (advanced)MEM08015BW5395
Carry out paint rectification and touch-up work for solids using two component systemsAURVTP3016WF537
Perform computationsMEM12024AW5449
Prepare surfaces by abrasive blasting (advanced)MEM08013BW5393
Treat corrosionMSAPMOPS301AS7272
Group 6
Unit Title National ID Unit of Study
Assist in the provision of on the job trainingMEM17003AW5552
Manually finish/polish materialsMEM08010BW5390
Perform basic penetrant testingMEM24001BW5699
Perform manual heating and thermal cuttingMEM05007CW5333
Perform routine gas metal arc weldingMEM05050BW5326
Perform routine manual metal arc weldingMEM05012CW5294
How to apply

This course will not use TAFE Admissions for Semester One 2018, please apply direct as per the following.

  • For apprenticeships and traineeships (where available), you must be employed in a training contract by an appropriate organisation to study.
  • For international students (where available), contact
    www.tafeinternational.wa.edu.au.
  • For all other courses, or if you need help or have questions please call us on
    1800 001 001, email us at info@smtafe.wa.edu.au, or use the enquiry form below.

Please note: All enrolling students will require a Unique Student Identifier number.

If you are unsure if you have the entry requirements (meet one of the three alternatives under Entrance Requirements, where applicable), please apply anyway with as much information as you can provide, alternatives such as literacy or numeracy tests, or entry based on past experience may be possible. 1800 001 001 for more information.

Important information
Enquire now
Call us
Email us

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

This course will not use TAFE Admissions for Semester One 2018, please apply direct as per the following.

  • For apprenticeships and traineeships (where available), you must be employed in a training contract by an appropriate organisation to study.
  • For international students (where available), contact
    www.tafeinternational.wa.edu.au.
  • For all other courses, or if you need help or have questions please call us on
    1800 001 001, email us at info@smtafe.wa.edu.au, or use the enquiry form below.

Please note: All enrolling students will require a Unique Student Identifier number.

If you are unsure if you have the entry requirements (meet one of the three alternatives under Entrance Requirements, where applicable), please apply anyway with as much information as you can provide, alternatives such as literacy or numeracy tests, or entry based on past experience may be possible. 1800 001 001 for more information.

This course will not use TAFE Admissions for Semester One 2018, please apply direct as per the following.

  • For apprenticeships and traineeships (where available), you must be employed in a training contract by an appropriate organisation to study.
  • For international students (where available), contact
    www.tafeinternational.wa.edu.au.
  • For all other courses, or if you need help or have questions please call us on
    1800 001 001, email us at info@smtafe.wa.edu.au, or use the enquiry form below.

Please note: All enrolling students will require a Unique Student Identifier number.

If you are unsure if you have the entry requirements (meet one of the three alternatives under Entrance Requirements, where applicable), please apply anyway with as much information as you can provide, alternatives such as literacy or numeracy tests, or entry based on past experience may be possible. 1800 001 001 for more information.

Qualification level

0
1

Links

Page last updated November 17, 2017