Home | Courses | CERTIFICATE II IN HEAVY VEHICLE SERVICING PRE-APPRENTICESHIP

CERTIFICATE II IN HEAVY VEHICLE SERVICING PRE-APPRENTICESHIP

National ID: AUR20516 | State ID: AB06

 

Are you geared up for a big career working with big gears?

When you complete the Certificate II in Automotive Servicing Technology (Heavy Vehicle Servicing Pre-Apprenticeship) you'll have what employers are looking for in an apprentice heavy vehicle or plant mechanic.

You will have the skills and knowledge to work effectively in the heavy automotive industry, working on loaders, bulldozers, dump trucks and haul trucks, inspecting and servicing transmissions, steering, brakes, fuel injection systems, hydraulics, and batteries, troubleshooting basic faults, and workplace safety and health.

Entrance Requirements

Study pathway

Job opportunities

Entrance Requirements
Study pathway
Job opportunities

Your qualification prepares you for roles such as:

When you complete the Certificate II in Automotive Servicing Technology (Heavy Vehicle Servicing Pre-Apprenticeship) you'll have what employers are looking for in an apprentice heavy vehicle or plant mechanic.

For information about jobs and pathways, please see
http://joboutlook.gov.au/

Further study opportunities:

As some of the off-the-job training is covered in the qualification, it is possible to achieve a certificate III of trade studies in shorter time, providing the on-the-job competencies are met to the employers' satisfaction.

Successful completion of the pre-apprenticeship qualification may exempt you from approximately one third of off-the-job apprenticeship subjects, depending on the career path you choose.

Additional subjects can be studied to add to qualifications, enhancing job prospects and employment opportunities.

Delivery location, important dates and study options

Overview

Fees and charges

Units

How to apply

Important information

Overview

Course Overview

Where Kwinana
Thornlie
Duration One semester, three days per week full-time
HowFull Time (Pre-Apprenticeship)
WhenAvailable Semester 1, 2018
Fees and charges

Please contact the college to receive an indicative price for this course.

View our 2017 Indicative Fees list.

These fees are indicative only for students enrolling in government funded courses on a full time basis.

The indicative fees for a course may differ between training providers due to the units they have included in the course outline. These differences generally result from adapting courses to meet local industry needs. The actual cost of a course will also vary if different electives are chosen by the student.

Other charges may apply.

VET Student Loans 

Students in an eligible diploma qualifications and above may be assisted through a loan under the Commonwealth Government's VET Student Loan scheme. For more information on entrance requirements and eligible course list please see www.education.gov.au/vet-student-loans 

For information on VET Student Loans at South Metropolitan TAFE please visit the Student Loans page.

International students

Fees, charges, available locations, applications, and enrolment procedures for international students are different to those applicable to local students.

International students can only study full-time.

For information on international student fees and application, please follow this link to the  TAFE International WA website 

Units

3 Work Practice Coordination Modules
Unit Title National ID Unit of Study
Module 1 (Placement arranged)AW866AW866
Module 2 (Commenced)AW867AW867
Module 3 (Mid-point)AW868AW868
Module 4 (Completed)AW869AW869
Group 1
Unit Title National ID Unit of Study
Carry out servicing operationsAURTTA004AXB11
Follow environmental and sustainability best practice in an automotive workplaceAURAEA002AXE88
Follow safe working practices in an automotive workplaceAURASA002AXE64
Identify basic automotive faults using troubleshooting processesAURATA001AXE63
Inspect and service braking systemsAURTTB001AXA89
Inspect and service cooling systemsAURTTC001AXA83
Inspect and service drive shaftsAURTTQ003AXA33
Inspect and service enginesAURTTE004AXA74
Inspect and service final drive assembliesAURTTQ001AXA35
Inspect and service steering systemsAURTTD002AXA79
Inspect and service suspension systemsAURTTD004AXA78
Inspect, test and service batteriesAURETR015AXD88
Use and maintain tools and equipment in an automotive workplaceAURTTK002AXA64
Group 2
Unit Title National ID Unit of Study
Assist with automotive workplace activitiesAURTTA002AXB14
Carry out mechanical pre-repair operationsAURTTA009AXB06
Communicate effectively in an automotive workplaceAURAFA003AXE85
Inspect and service manual transmissionsAURTTX002AXA24
Operate electrical test equipmentAURETK003WI932
Select and use bearings, seals, gaskets, sealants and adhesivesAURTTA005AXB10
Use and maintain measuring equipment in an automotive workplaceAURTTK001AXA63
How to apply
Important information
Enquire now
Call us
Email us

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

  • This course uses TAFE Admissions. To study full-time in Semester One 2018, apply through tasonline.tafe.wa.edu.au/ on or after September 1st, 2017 and before December 8th, 2017 to be included in the first round of offers. Applications will continue to be accepted until January 3rd, 2018 but will only be included in second round offers.
  • For apprenticeships and traineeships (where available), you must be employed in a training contract by an appropriate organisation to study.
  • For international students (where available), contact
    www.tafeinternational.wa.edu.au.
  • For all other courses, or if you need help or have questions please call us on
    1800 001 001 or email us at info@smtafe.wa.edu.au

Please note: All enrolling students will require a Unique Student Identifier number.

If you are unsure if you have the entry requirements (meet one of the three columns below), please apply anyway with as much information as you can provide, alternatives such as literacy or numeracy tests, or entry based on past experience may be possible. 1800 001 001 for more information.

Entrance Requirements

School Leaver Non-School Leaver AQF
OLNA or NAPLAN 9 Band 8C Grades in Year 10 English and Maths or equivalentCertificate I or Certificate II

  • This course uses TAFE Admissions. To study full-time in Semester One 2018, apply through tasonline.tafe.wa.edu.au/ on or after September 1st, 2017 and before December 8th, 2017 to be included in the first round of offers. Applications will continue to be accepted until January 3rd, 2018 but will only be included in second round offers.
  • For apprenticeships and traineeships (where available), you must be employed in a training contract by an appropriate organisation to study.
  • For international students (where available), contact
    www.tafeinternational.wa.edu.au.
  • For all other courses, or if you need help or have questions please call us on
    1800 001 001 or email us at info@smtafe.wa.edu.au

Please note: All enrolling students will require a Unique Student Identifier number.

If you are unsure if you have the entry requirements (meet one of the three columns below), please apply anyway with as much information as you can provide, alternatives such as literacy or numeracy tests, or entry based on past experience may be possible. 1800 001 001 for more information.

Entrance Requirements

School Leaver Non-School Leaver AQF OLNA or NAPLAN 9 Band 8C Grades in Year 10 English and Maths or equivalentCertificate I or Certificate II

Links

Page last updated September 22, 2017